AISLE TAPE
UT-00-Y-3 INTERTAPE POLYMER GROUP
3" X 36-YD YELLOW AISLE MARKING TAPE-UTCUT00Y3 >
UT-00-Y-1 INTERTAPE 1"X36-YD YELLOW AISLE MARKING TAP
1" X 36-YD YELLOW AISLE MARKING TAPE-UTCUT00Y1 >
UT-00-P-3 INTERTAPE POLYMER GROUP
3" X 36-YD PURPLE AISLE MARKING TAPE-UTCUT00P3 >
UT-00-OR-1 INTERTAPE POLYMER GROUP
1" X 36-YD ORANGE AISLE MARKING TAPE-UTCUT00OR1 >
UT-00-O-3 INTERTAPE POLYMER GROUP
3" X 36-YD ORANGE AISLE MARKING TAPE-UTCUT00O3 >
UT-00-O-2 INTERTAPE POLYMER GROUP
2" X 36-YDS ORANGE AISLE MARKING TAPE-UTCUT00O2 >
UT-00-GY-2 INTERTAPE POLYMER GROUP
2" X 36-YDS GREY AISLE MARKING TAPE-UTCUT00GY2 >
Recently Viewed
34-MM 12-POINT COMBINATION WRENCH - TABCW34MM>
ITM T310002 Bit Screwdriver, #2 Point Phillips® Point, 4 in OAL
NIBCO® Press System® 9032000PC PC604 Adapter, 1-1/2 in Nominal, Press x MNPT End Style, Wrot Copper, Domestic
The NIBCO® Press System® copper male adapter features an inboard bead and EPDM O-ring. Simply applying pressure from a pressing tool tightens the O-ring onto the tube, ensuring a clean, watertight seal in seconds, with no flame, solder or flux. The male adapter has a press connection and male NPT thread. The fitting provides a method for adapting a press connection to a threaded connection.
Zurn® QickTite® QC4 Unassembled Cone, 3/4 in Nominal, CTS End Style
Milwaukee® 48-20-6701 Drill Bit, 3/8 in Drill Bit, 3/8 in Shank SDS-Plus Shank, 10 in D Cutting, 12 in OAL
The MILWAUKEE® SDS Plus Rebar Cutters are the toughest in rebar, delivering up to 3x life in rebar compared to competitive rebar cutters. These bits, designed with precision ground carbide for rebar only drilling, provide up to 10x faster drilling speeds in rebar vs. 4-cutter drill bits. Milwaukee SDS Plus Rebar Cutters are equipped with HAMMER GUARD™ protective shanks, preventing carbide teeth destruction from accidental use in rotary hammer mode, saving time and money. Deep debris channels provide the fastest rebar shard removal while double ejection slots allow for easy rebar slug removal. Available in sizes 3/8” – 1-1/2”, Milwaukee SDS Plus Rebar Cutters are the optimal solution for drilling embedded rebar for corded and cordless SDS Plus rotary hammers. For use in rebar only.
TYPE II 225-LB RATED XTEND AND CLIMB LADDER - COR770>
