Ear Muffs
Pyramex® PM3010 Earmuffs, 26 dB Noise Reduction, Black, Over The Head Band Position, ANSI S3.19
Pyramex® PM3010 Earmuffs, 26 dB Noise Reduction, Black, Over The Head Band Position, ANSI S3.19
Pyramex® CM6010 Hard Hat Earmuffs, 27 dB Noise Reduction, Gray, ANSI S3.19
Pyramex® CM6010 Hard Hat Earmuffs, 27 dB Noise Reduction, Gray, ANSI S3.19
MSA 10061272 Sound Control™ Dielectric Passive Hard Hat Earmuffs, 27 dBA Noise Reduction, Gray, ANSI S3.19-1974
MSA 10061272 Sound Control™ Dielectric Passive Hard Hat Earmuffs, 27 dBA Noise Reduction, Gray, ANSI S3.19-1974
L-3-N Neckband/behind-the-head Earmuffs
NECKBAND/BEHIND-THE-HEAD EARMUFFS - HOWL3N >
Klein® 60502 Hard Hat Earmuff, 26 dB Noise Reduction, Gray/Orange, ANSI S3.19-1974
Klein Tools Full Brim Hard Hat Earmuffs are designed to work with all Klein Tools Full Brim Hard Hats, and are intended to provide limited protection from harmful noise. Tested in accordance with ANSI S3.19-1974 standards, the NRR (noise reduction rating) for these earmuffs is 26dB. Designed for all day comfort and effective acoustic seal.
Howard Leight by Honeywell 1010970 Thunder® T3 Dielectric Earmuffs, 30 dB Noise Reduction, Black, Over The Head Band Position, ANSI S3.19-1974
Howard Leight by Honeywell 1010970 Thunder® T3 Dielectric Earmuffs, 30 dB Noise Reduction, Black, Over The Head Band Position, ANSI S3.19-1974
330-3002 Model 3000 Hearing Protector
MODEL 3000 HEARING PROTECTOR MUFF - EAR3303002 >
330-3001 Model 1000 Hearing Protector Earmuffs
MODEL 1000 HEARING PROTECTOR EARMUFFS - EAR3303001>
Recently Viewed
Master Lock® 7D Safety Padlock, Different Key, Laminated Steel Body, 3/16 in Dia Shackle, Silver, 4-Pin Tumbler Cylindrical Locking Mechanism
Laminated steel padlock. Keyed different. 1-1/8 in (29 mm) wide laminated steel body for superior strength. 3/16 in (5 mm) Dia, 9/16 in (14 mm) high, 1/2 in (13 mm) wide standard steel shackle. Non-rekeyable, 4-pin tumbler cylinder. More than 1,500 key changes for maximum pick resistance. Retail carded packaging, shelf pack quantity 4, master carton quantity 24.
Black Eyeglass Cord / Lanyard Rubber Ends Slide Over Eyewear Temples Dual Slide Beads for Maximum Adjustability 30 Inch Relaxed Length Metal Detectable Rubber ends fit on most eyewear temples MCR Safety offers a wide variety of products to assist in the care and maintenance of your safety eyewear. The 215 eyewear cord helps you keep up with your safety glasses in style. The soft rubber loops on each end of this lanyard slide snugly onto most eyewear temples, holding your glasses firmly in place. Two take-up cinch slide beads allow for maximum adjustability. This eyewear cord is metal-detectable.
Proto® TorquePlus™ J07519M Standard Length Socket, Metric, 3/4 in Square Drive, 19 mm
Proto® TorquePlus™ J07519M Standard Length Socket, Metric, 3/4 in Square Drive, 19 mm
26-MM 12-PT 1/2" -DRIVE DEEP IMPACT SOCKET-GRY2126MD >
Proto® TorquePlus™ J07523M Standard Length Socket, Metric, 3/4 in Square Drive, 23 mm
Proto® TorquePlus™ J07523M Standard Length Socket, Metric, 3/4 in Square Drive, 23 mm
Proto® TorquePlus™ J07527M Standard Length Socket, Metric, 3/4 in Square Drive, 27 mm
Proto® TorquePlus™ J07527M Standard Length Socket, Metric, 3/4 in Square Drive, 27 mm
