Hard Hat Faceshield Mounting Accessories
ERBĀ® 19146 AmericanaĀ® Replacement Brow Pad, For Use With Omega IIĀ®, Omega IIĀ® Full Brim and AmericanaĀ® Hard Hat, Nylon/Polyester Foam, Blue, ANSI Z89.1
ERBĀ® 19146 AmericanaĀ® Replacement Brow Pad, For Use With Omega IIĀ®, Omega IIĀ® Full Brim and AmericanaĀ® Hard Hat, Nylon/Polyester Foam, Blue, ANSI Z89.1
JACKSON SAFETYĀ® 14391 Model P Cap-Style Adapter, For Use With SC-6/Sentry IIIĀ®/ChargerĀ® Full Brim Hard Hats and Forward Hard Hats, Metal, Metal
MSA V-GardĀ® 10115730 Slotted Standard Grade Faceshield Frame, For Use With MSAĀ® Slotted Cap Style, Plastic, Black, ANSI/ISEA Z87.1-2010
The standard slotted frame works ideally with any MSA slotted helmet. The universal frame featuring a heavy-duty, flat, rubber strap can be used with slotted and non-slotted MSA helmets.Ā With the unique sloped frame design, material slides off the frame and out of site. The optional debris control creates a tight seal between helmet and frame. The elevated temperature versions withstand temperatures up to 350ĀŗF (176ĀŗC).
MSA V-GardĀ® 10117496 Replacement Slot Adapter, For Use With V-GardĀ® Slotted Caps, Black, ANSI/ISEA Z87.1-2015, AS/NZS 1337, CSA Z94.3, EN 166
Use only genuine MSA V-Gard Accessory System replacement parts to help ensure compatibility and compliance. MSA does not warrant, guarantee, or promote the use of components manufactured by other companies when used in conjunction with MSA products.Ā
MSA V-GardĀ® 10158799 Faceshield Frame, For Use With MSA V-GardĀ® Visors and MSA Slotted or Unslotted Caps or Full Brim Hats, Aluminum, Silver, Specifications Met: ANSI/ISEA Z87.1-2010
Metal Frames are designed and tested to perform to requirements with MSA slotted or unslotted Caps or Full Brim Hats. The coil spring offers easy loading onto the helmet, while the side clips provide quick and simple attachment for V-Gard Visors. Metal Frames are designed for elevated temperature enivronments.
PyramexĀ® HHAA Cap Style Hard Hat Adapter, Aluminum, Silver
Pyramex F/BRIM HARDHAT FACESHIELD ADAPTERS PSP HHAAW
PyramexĀ® HHAAW Full Brim Hard Hat Adapter, Aluminum, Silver
Recently Viewed
J-160-C/P-C/L #160 Roller Chain Connecting
#160 ROLLER CHAIN CONNECTING LINKS-BRWJ160C/PCORDLESS >
1/2" -DRIVEX14" SPUD RATCHETS-ARS12907 >
BrowningĀ® 1251529 Straight Type LR Bevel Gear Reducer, Shaft Input, Shaft Output, 1 hp, 2:1 Gear, 875 rpm Maximum Output, 36.013 in-lb Input/57.62 in-lb Output Torque Rating
BrowningĀ® cast iron bevel and spiral bevel gear reducers are constructed of rugged cast iron housings. These housings are line bored for precise gear and bearing alignment. To offer maximum performance, these reducers are designed with tapered roller and ball bearings. BrowningĀ® cast iron bevel and spiral bevel gear reducers are available in six sizes and ratios. These range from 1:1 to 3:1, with speed-up ratios available. Torque capacity ranges from 99 to 5942 in-lb.
ITM 207SP0044 Heavy Duty Drill Bit, #44 Drill - Wire, 0.0860 Drill - Decimal Inch, 135 deg Point Angle, M2 HSS, Black Oxide
ITM 207SP0044 Heavy Duty Drill Bit, #44 Drill - Wire, 0.0860 Drill - Decimal Inch, 135 deg Point Angle, M2 HSS, Black Oxide
GreenleeĀ® Kwik StepperĀ® 30008 Multi-Hole Step Bit, 1/2 in Dia Min Hole, 1-1/8 in Dia Max Hole, 3 Steps, Steel, 3 Hole Sizes, 3/8 in Shank
GreenleeĀ® Kwik StepperĀ® 30008 Multi-Hole Step Bit, 1/2 in Dia Min Hole, 1-1/8 in Dia Max Hole, 3 Steps, Steel, 3 Hole Sizes, 3/8 in Shank
OXYGEN GAUGES - Low pressure regulator gauge - 2 inch (50.8 mm) face with 1/4 inch (6.35 mm) national pipe thread (NPT) - 0-200 PSIG
