MSA V-Gard® 10115730 Slotted Standard Grade Faceshield Frame, For Use With MSA® Slotted Cap Style, Plastic, Black, ANSI/ISEA Z87.1-2010
The standard slotted frame works ideally with any MSA slotted helmet. The universal frame featuring a heavy-duty, flat, rubber strap can be used with slotted and non-slotted MSA helmets. With the unique sloped frame design, material slides off the frame and out of site. The optional debris control creates a tight seal between helmet and frame. The elevated temperature versions withstand temperatures up to 350ºF (176ºC).
-
BrandMSA
-
UPC641817025628
-
Manufacturer Part Number10115730
-
CountryUSA|Canada
-
MaterialPlastic
-
ColorBlack
-
TypeSlotted Standard Grade
-
Dimensions6.5 x 9.72 x 2.56 in
-
Specifications MetANSI/ISEA Z87.1-2010
-
Suitable For Use WithMSA® Slotted Cap Style
- Unique 3-point visor loading to fit and remove visors quickly
- Sloped design allows material to easily slide off the frame
- Works with or without earmuffs
- Perfect Compatibility with many half-mask respirators and more
- Non-metal construction for use in electrical applications
- Replaceable optional debris control creates tight seal between frame and helmet
- Universal heavy-duty flat rubber strap for easy and secure placement on MSA slotted and non-slotted helmets
- ET frames are tested to temperatures of 350F (176.7C), reducing warping, cracking or crazing
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 12V755 |
| MSC | 77624005 |
-
UNSPSC46181707
-
Package DescriptionEACH
-
Standards/ApprovalsANSI/ISEA Z87.1-2010
-
SDS
-
Catalog
-
Specification Sheet
Recently Viewed
MSA V-Gard® 10115730 Slotted Standard Grade Faceshield Frame, For Use With MSA® Slotted Cap Style, Plastic, Black, ANSI/ISEA Z87.1-2010
The standard slotted frame works ideally with any MSA slotted helmet. The universal frame featuring a heavy-duty, flat, rubber strap can be used with slotted and non-slotted MSA helmets. With the unique sloped frame design, material slides off the frame and out of site. The optional debris control creates a tight seal between helmet and frame. The elevated temperature versions withstand temperatures up to 350ºF (176ºC).
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Machined type Needle Roller Bearings feature low sectional height and large load ratings. A highly rigid outer ring makes these bearings ideal for light alloy housings as well.
Crosby® 1027203 H-330-5/8 Grab Hook, 5/8 in Trade, 13000 lb Load, Clevis Attachment, Forged Carbon Steel
Crosby® 1027203 H-330 Grab Hook, 5/8 in Trade, 13000 lb Load, Clevis Attachment, Forged Carbon Steel
HG-223-3/4X6 CROSBY MATERIAL HANDLING GROUP
3/4X6 HOOK/HOOK TURNBUCKLE-CROHG2233/4X6 >
APCOM 100108301 Heating Element Kit, 120 V, 1440 W
The wheel pin is universal to all REED LCRC and RC cutters. It is used to hold the wheel in place and allows for easy change of wheels, whether from old to new, or from wheels for steel to wheels for cast/ductile iron, which gives these cutters their useful versatility. (Note: the RC36S and RC42S cutters are only for steel.) REED strongly recommends changing all four cutter wheels simultaneously for optimum cutter performance. The 93220 outboard roller is for use with all cutter wheels except the RCX wheel. Each cutter wheel requires two outboard rollers for a total of eight per cutter. The 93222 outboard roller is a specially designed roller for use with the RCX wheel only. When using RCX wheels, it is critical to change the outboard rollers from 93220 and use only the 93222 roller. The RCX wheels are designed to cut thicker-walled pipe, and the 93222 roller has a smaller diameter, which allows the longer profile of the RCX wheel to penetrate steel or stainless pipe wall up to 0.8 inches (20.3 mm). As with all LCRC or RC cutters, a total of eight outboard rollers is required per cutter. To cut only thicker-walled steel or stainless steel pipe, order cutters with the "X" designation (such as LCRC8X), because these come automatically equipped with the RCX wheels and 93222 rollers.
