6030-M MCR SAFETY PRODUCTS
MEDIUM 8-MIL NO POWDER NITRILE GLOVE-BOX OF 50 - GLV6030M>
Recently Viewed
MEDIUM 8-MIL NO POWDER NITRILE GLOVE-BOX OF 50 - GLV6030M>
MEDIUM 4-MIL POWDER NITRILE GLOVE--BOX OF 100 - GLV6020M >
The Fluidmaster 218 Refill Tube and Clip Replacement offers a proven solution to replace corroded, or leaky refill tubes. Featuring an easy to install design, that works with not only Fluidmaster toilet fill valves, including 400A, but will also work with most other fill valves. Eliminate purchasing a new fill valve with a simple DIY toilet repair part. Built with quality rubber and plastic materials, and including a 1 year warranty.
Crosby® 1043515 G-291-5/8 X 8 Eye Bolt With Regular Nut, 5/8 in, 8 in L Shank, Forged Steel, Hot Dipped Galvanized
Crosby® 1043515 G-291 Eye Bolt With Regular Nut, 5/8 in, 8 in L Shank, Forged Steel, Hot Dipped Galvanized
Linn 20FS30 Rough Bore Spur Gear, 20 Diametral Pitch, 14.5 deg Pressure Angle, 3/8 in W Face, 30 Teeth, 1-1/2 in Dia Pitch, 3/8 to 3/4 in Dia Bore, Steel
Steel spur gears in 20 to 2 Diametral Pitch - 14.5 deg pressure angle stocked. Other circular, metric or D. P. sizes made-to-order in 14.5 deg, 20 deg or other pressure angles from steel, nylon, phenolic, bronze, cast iron or other materials up to 96 in Dia Internal gears and ground external profiles may be provided subject to equipment limitations.
20-Q-25-L-56 Dodge® Tigear-2® 20Q25L56 Standard Right Angle Worm Gear Speed Reducer, Quill Input, Solid A Shaft Output, 1.11 hp, 25:1 Gear, 70 rpm Maximum Output, 788 in-lb Torque Rating
The speed reducer shall be a single reduction worm gear reducer incorporating three input configurations - a quill style for direct attachment of electric motors, a separate keyed input shaft suitable for flexible coupling to a footed motor or belt and pulley input configuration and a motor adapter style input that employs a three piece coupling to connect electric motors to the reducer. These input configurations shall be available in both solid and hollow output shaft designs. The reducer shall be manufactured in the United States of America.
