MCR Safety 3-MIL NITRILE--USE "GLV" 6010-S
MCR Safety 6010ES NitriMedâ„¢ 6010E Non-Sterile Disposable Gloves, S, Nitrile, Blue, Non-Powdered, Smooth, 3 mil THK, Application Type: Medical/Economy Grade, Ambidextrous Hand
-
BrandMCR Safety
-
UPC045143001101
-
Manufacturer Part Number6010ES
-
CountryUSA
-
FinishSmooth
-
Thickness3 mil
-
Powder StyleNon-Powdered
-
MaterialNitrile
-
ResistsChemicals, Puncture and Tear
-
ColorBlue
-
TypeNon-Sterile
-
Hand TypeAmbidextrous
-
Application TypeMedical/Economy Grade
-
SeriesNitriMedâ„¢ 6010E
-
Cuff StyleRolled
-
SizeS
-
StyleStandard Finger/Wing Thumb/Reversible Pattern
-
Palm MaterialNitrile
-
LiningUnlined
- Nitrile gloves are three times more puncture resistant than rubber and can be used to offer superior resistance to many types of chemicals
- This glove is an excellent alternative for individuals who experience allergic reactions to latex
-
UNSPSC46181504
-
Package Description1/CS
-
Standards/ApprovalsFDA Approved
-
Specification Sheet
Recently Viewed
MCR Safety 6010ES NitriMedâ„¢ 6010E Non-Sterile Disposable Gloves, S, Nitrile, Blue, Non-Powdered, Smooth, 3 mil THK, Application Type: Medical/Economy Grade, Ambidextrous Hand
Nominal Size: 2-inch diameter Length: 4 inches Material: Schedule 80 PVC (heavy-duty, thick-walled thermoplastic, typically gray Connection Type: Male National Pipe Thread x Male National Pipe Thread (MNPT x MNPT / TBE - Threaded Both Ends) Pressure Rating: Up to 400 PSI at 73°F (varying by exact application and system temp) Temperature Range: 33°F to 140°F (0.5°C to 60°C) Standards Compliance: Typically manufactured according to ASTM D1785 standards.
793620 DO-IT-BEST/DAP 10.1 OZ. PREMIUM POLYURETHANE CONSTRUCTION ADHESIVE SEALANT, WHITE
ONE-PART, MOISTURECURING, NON-SAG, ELASTOMERICA COMMERCIAL-GRADE SEALANT. PROVIDES A LONGLASTING, DURABLE SEAL WHEN FILLING EXTERIOR GAPS, JOINTS AND CRACKS. OFFERS SUPERIOR ADHESION TO MOST SUBSTRATES.
-JWH793620 >
Dichtomatik 75102017 O-Ring, 022 Dash Number, 0.989 in ID x 1.129 in OD, FKM, 75 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
