Chemical Resistant Gloves
Showa Best® 6797R-10 6797 Coated Chemical-Resistant Gloves, L, Black, Cotton Lining, 18 in L, Resists: Acid, Abrasion, Caustic, Cut, Oil, Grease and Many Solvent, Extended Cuff
Forged with rugged neoprene, cotton lining and a rough grip, SHOWA® 6797R is designed for arm-length comfort in hot or cold environments while providing protection against acids and caustics.
MCR Safety X-LRG 13" 18-MIL NITRILE GLOVE GLV 5330-S
MCR Safety 5330S Nitri-Chem™ Industrial Grade Chemical-Resistant Gloves With Black Logo, XL, Paired Hand, Nitrile, Green, Flock Lining, 13 in L, Resists: Chemical and Puncture, Unsupported Support, Straight Cuff, 18 mil THK
MCR Safety SMALL 8-MIL 12" NITRILE GLOVES GLV 5300-S
MCR Safety 5300S Industrial Grade Chemical-Resistant Gloves, S, Paired Hand, Nitrile, Blue, Unlined Lining, 12 in L, Resists: Abrasion and Puncture, Unsupported Support, Straight Cuff, 8 mil THK
MCR Safety SMALL 13" 18-MIL NITRILE GLOVE GLV 5337-S
MCR Safety 5337S Nitri-Chem™ Industrial Grade Chemical-Resistant Gloves With Black Logo, S, Paired Hand, Nitrile, Green, Flock Lining, 13 in L, Resists: Chemical and Puncture, Unsupported Support, Straight Cuff, 18 mil THK
MCR Safety LARGE 13" 18-MIL NITRILE GLOVE GLV 5339-S
MCR Safety 5339S Nitri-Chem™ Industrial Grade Chemical-Resistant Gloves With Black Logo, L, Paired Hand, Nitrile, Green, Flock Lining, 13 in L, Resists: Chemical and Puncture, Unsupported Support, Straight Cuff, 18 mil THK
MCR Safety 30-MIL LINED BLACK NEOPRENE GLOVES GLV 5435-M
Neoprene - Not Just for Wet Suits Our neoprene gloves are thick, waterproof, and an effective replacement for latex and vinyl products. Neoprene is a synthetic rubber that maintains flexibility over a wide range of temperatures.
MCR Safety 30-MIL LINED BLACK NEOPRENE GLOVES GLV 5435-L
MCR Safety 5435L Industrial Grade Chemical-Resistant Gloves, L, Paired Hand, Neoprene, Black, Flock Lining, 12 in L, Resists: Acid, Chemical and Caustic, Unsupported Support, Straight Cuff, 30 mil THK
GLOVES 430010 4300 Premium Grade Chemical-Resistant Gloves, XL, Neoprene, Blue/Yellow, Flock Lining, 12 in L, Unsupported Support, Straight Cuff, 28 mil THK
4300 Premium Grade Chemical-Resistant Gloves, XL/SZ 10, Neoprene, Blue/Yellow, Flock Lining, 12 in L, Unsupported Support, Straight Cuff, 28 mil THK
Best Gloves 14" GAUNTLET NEOPRENE GLOVES BST 6784
Forged with rugged neoprene and a 14 in gauntlet combined with cotton lining, SHOWA® 6784 is designed for comfort in hot or cold environments while providing protection against acids and caustics.
Best Gloves 11-MIL SIZE-7 NITRILE GLOVES BST NM-7
Crafted using special ergonomically designed forms to reduce fatigue and enhance comfort, SHOWA® NM11 is 11 mils thick and 13" long and creates a barrier between you and a range of chemicals.
Best Gloves 11-MIL SIZE-10 NITRILE GLOVES BST NM-10
Crafted using special ergonomically designed forms to reduce fatigue and enhance comfort, SHOWA® NM11 is 11 mils thick and 13" long and creates a barrier between you and a range of chemicals.
Recently Viewed
1-1/2-AMP 600-VOLT AC FA FUSES
THIS PORTABLE POWER CABLE IS IDEAL FOR WIRING IN APPLIANCES, TOOLS, AND TEMPORARY POWER OR LIGHTING. IT HAS A VOLTAGE RATING OF 600V, CAN DELIVER UP TO 10 AMPS.
-ALE18/3SO >
HANDLE-LOK HITCH PIN. SPRING MADE OF STEEL WIRE HOLDS PINS IN PLACE. FEATURES A GROOVED PIN TO SECURE WIRE. SPRING MADE OF STEEL WIRE HOLDS PINS IN PLACE. GROOVED PIN TO SECURE WIRE.
-JWH716238 >
Selkirk® by Duravent 103825 RV Series Adjustable Roof Flashing, Steel, 3 in Pipe, 14-7/8 in W x 12-1/4 in L Base, Domestic
Selkirk® by Duravent 103825 RV Series Adjustable Roof Flashing, Steel, 3 in Pipe, 14-7/8 in W x 12-1/4 in L Base, Domestic
FYH® UCFB207 23 UCFB Cylindrical Flange Mount Ball Bearing Unit, 1-7/16 in Dia Bore, 1-13/16 in L Bolt Center-to-Center, 3/8 in Dia Bolt Circle, 3-Bolt Flange Mount, 3-17/32 in OAL/Dia
FYH® UCFB207 23 UCFB Cylindrical Flange Mount Ball Bearing Unit, 1-7/16 in Dia Bore, 1-13/16 in L Bolt Center-to-Center, 3/8 in Dia Bolt Circle, 3-Bolt Flange Mount, 3-17/32 in OAL/Dia
Justrite® 28659 EcoPolyBlend™ Accumulation Center, 6 Drums, 73 gal Spill, 7500 lb Load, 100% Recycled Polyethylene
Combine units to create your own customized spill-control system. Low-profile centers only measure 5.5‐inches (140‐mm) high for easy handling of drums. Made with 100% recycled polyethylene, these accumulation centers are nearly impervious to chemicals, including acids and corrosives. Seamless construction eliminates leaks, making them ideal for drum filling and dispensing operations. Self-locating grates won’t ride‐up, and are removable for easy cleaning. Combine 2-, 4-, 6-, and 8-drum modular units to create your own customized system. Use the optional joining clips to firmly lock units together. Sumps remain separate and clips can be removed for easy repositioning. Also available in non-recycled yellow color. Use optional Sump-to-Sump™ drain kit (includes joining clips and transfer tube) for applications requiring a continuous sump. Kit allows you to join centers together, on-site, for full compliance with regulations when sump capacities reach 71‐gallons (270‐liters). Kit includes one pair stainless steel joining clips, one pair rubber grommets, one polytetrafluoroethylene (PTFE) transfer tube. (Patent No US 6,622,879,B1) EPA compliant, supports SPCC, and meets NFPA 1 2009 edition and IFC fire codes. Used for secondary spill control with the ability to combine units to customize your system.
