Chemical Resistant Gloves
Crafted using special ergonomically designed forms to reduce fatigue and enhance comfort, SHOWA® NM11 is 11 mils thick and 13" long and creates a barrier between you and a range of chemicals.
Crafted using special ergonomically designed forms to reduce fatigue and enhance comfort, SHOWA® NM11 is 11 mils thick and 13" long and creates a barrier between you and a range of chemicals.
Forged with rugged neoprene and a 14 in gauntlet combined with cotton lining, SHOWA® 6784 is designed for comfort in hot or cold environments while providing protection against acids and caustics.
GLOVES 430010 4300 Premium Grade Chemical-Resistant Gloves, XL, Neoprene, Blue/Yellow, Flock Lining, 12 in L, Unsupported Support, Straight Cuff, 28 mil THK
4300 Premium Grade Chemical-Resistant Gloves, XL/SZ 10, Neoprene, Blue/Yellow, Flock Lining, 12 in L, Unsupported Support, Straight Cuff, 28 mil THK
MCR Safety 5300S Industrial Grade Chemical-Resistant Gloves, S, Paired Hand, Nitrile, Blue, Unlined Lining, 12 in L, Resists: Abrasion and Puncture, Unsupported Support, Straight Cuff, 8 mil THK
MCR Safety 5300S Industrial Grade Chemical-Resistant Gloves, S, Paired Hand, Nitrile, Blue, Unlined Lining, 12 in L, Resists: Abrasion and Puncture, Unsupported Support, Straight Cuff, 8 mil THK
MCR Safety 5330S Nitri-Chemâ„¢ Industrial Grade Chemical-Resistant Gloves With Black Logo, XL, Paired Hand, Nitrile, Green, Flock Lining, 13 in L, Resists: Chemical and Puncture, Unsupported Support, Straight Cuff, 18 mil THK
MCR Safety 5330S Nitri-Chemâ„¢ Industrial Grade Chemical-Resistant Gloves With Black Logo, XL, Paired Hand, Nitrile, Green, Flock Lining, 13 in L, Resists: Chemical and Puncture, Unsupported Support, Straight Cuff, 18 mil THK
MCR Safety 5337S Nitri-Chemâ„¢ Industrial Grade Chemical-Resistant Gloves With Black Logo, S, Paired Hand, Nitrile, Green, Flock Lining, 13 in L, Resists: Chemical and Puncture, Unsupported Support, Straight Cuff, 18 mil THK
MCR Safety 5337S Nitri-Chemâ„¢ Industrial Grade Chemical-Resistant Gloves With Black Logo, S, Paired Hand, Nitrile, Green, Flock Lining, 13 in L, Resists: Chemical and Puncture, Unsupported Support, Straight Cuff, 18 mil THK
MCR Safety 5339S Nitri-Chemâ„¢ Industrial Grade Chemical-Resistant Gloves With Black Logo, L, Paired Hand, Nitrile, Green, Flock Lining, 13 in L, Resists: Chemical and Puncture, Unsupported Support, Straight Cuff, 18 mil THK
MCR Safety 5339S Nitri-Chemâ„¢ Industrial Grade Chemical-Resistant Gloves With Black Logo, L, Paired Hand, Nitrile, Green, Flock Lining, 13 in L, Resists: Chemical and Puncture, Unsupported Support, Straight Cuff, 18 mil THK
MCR Safety 5435L Industrial Grade Chemical-Resistant Gloves, L, Paired Hand, Neoprene, Black, Flock Lining, 12 in L, Resists: Acid, Chemical and Caustic, Unsupported Support, Straight Cuff, 30 mil THK
MCR Safety 5435L Industrial Grade Chemical-Resistant Gloves, L, Paired Hand, Neoprene, Black, Flock Lining, 12 in L, Resists: Acid, Chemical and Caustic, Unsupported Support, Straight Cuff, 30 mil THK
MCR Safety 5435M Industrial Grade Chemical-Resistant Gloves, M, Paired Hand, Neoprene, Black, Flock Lining, 12 in L, Resists: Acid, Chemical and Caustic, Unsupported Support, Straight Cuff, 30 mil THK
Neoprene - Not Just for Wet Suits Our neoprene gloves are thick, waterproof, and an effective replacement for latex and vinyl products. Neoprene is a synthetic rubber that maintains flexibility over a wide range of temperatures.
Showa Best® 6797R-10 6797 Coated Chemical-Resistant Gloves, L, Black, Cotton Lining, 18 in L, Resists: Acid, Abrasion, Caustic, Cut, Oil, Grease and Many Solvent, Extended Cuff
Forged with rugged neoprene, cotton lining and a rough grip, SHOWA® 6797R is designed for arm-length comfort in hot or cold environments while providing protection against acids and caustics.
Recently Viewed
MCR Safety 9668XL 9668 Regular Weight General Purpose Gloves, Straight Thumb Style, XL, PVC Palm, 7 ga 60% Cotton/40% Polyester, Brown/Natural, Knit Wrist Cuff, Resists: Abrasion, Polyester Lining
Whether you select 2-sided PVC dots or single sided, you will increase the grip and abrasion-resistance. The 9668 series features 7-ga cotton polyester shell with PVC dots on both sides of the glove.
Gates® Power Transmission Polyflex® JB® 2/5M925JB Joined Band Light Duty V-Belt, 5M Section, 3/16 in W Top, 36.42 in L Outside, 1/8 in THK, High Modulus Polyurethane
Developed by Gates and produced to patented manufacturing processes, these belts provide more load-carrying capacity at higher speeds to small multiple V-belt precision drives. This results in significant cost savings and improved design freedom.
ISOSTATIC™ Oilube® 401202 Round Bore Sleeve Bearing, 5/8 in Dia Bore, 7/8 in OD, 1-1/4 in W
ISOSTATIC™ Oilube® 401202 Round Bore Sleeve Bearing, 5/8 in Dia Bore, 7/8 in OD, 1-1/4 in W
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
TA0107L25 Dodge® Torque-Arm™ II 906000 Heavy Duty Single and Double Reduction Speed Reducer, Solid Shaft Input, Tapered Hollow Bore Output, 25 hp, 40:1 Gear
With 60 years of proven dependability and more than 1.8 million units in service throughout the world, Dodge® Torque-Arm™ speed reducers are the standard of the industry and the benchmark to which others are compared. The Torque-Arm™ II is a shaft mount helical gear reducer that mounts directly to the driven shaft with a number of accessories available to produce versatility, cost savings and long life. A long list of standard features makes this reducer suitable for a wide range of environments right off the shelf.
Milwaukee® 49-56-3003 Hole Saw, 3 in Dia, 1-5/8 in D Cutting, Tungsten Carbide Cutting Edge
Milwaukee® carbide tipped hole saws provide long life and faster cutting in cement board, ceramic tiles, fiberglass and wood products such as fiberboard, flake board and plywood. Use a carbide tipped pilot bit (49-56-8005) when cutting ceramic tile, brick and other abrasive materials.
