MCR Safety 99110 Excalibur® Value Lightweight Single Lens Safety Glasses With Side Shields, Duramass® Hard Coat, Clear Lens, Half-Frame Frame, Gold, Nickel Silver Frame, Polycarbonate Lens, ANSI Z87.1-2003, CSA Z94.3, AS/NZS1337
MCR Safety 99110 Excalibur® Value Lightweight Single Lens Safety Glasses With Side Shields, Duramass® Hard Coat, Clear Lens, Half-Frame Frame, Gold, Nickel Silver Frame, Polycarbonate Lens, ANSI Z87.1-2003, CSA Z94.3, AS/NZS1337
-
BrandMCR Safety
-
UPC766868991101
-
Manufacturer Part Number99110
-
CountryUSA
-
Temple StyleSpatula
-
Frame ColorGold
-
Frame MaterialNickel Silver
-
Frame TypeHalf-Frame
-
TypeLightweight Single Lens
-
UV ProtectionYes %
-
SeriesExcalibur® Value
-
SizeUniversal
-
Specifications MetANSI Z87.1-2003, CSA Z94.3, AS/NZS1337
-
Lens CoatingDuramass® Hard Coat
-
Lens ColorClear
-
Lens MaterialPolycarbonate
- Incorporating a single polycarbonate lens design and contemporary styling the Excalibur® provides an exceptional wide angle of unrestricted vision and side protection
- Fully adjustable temples and lightweight nylon frame allow for optimal comfort and fit
- Molded-in nose bridge comfortably fits a wide variety of faces
- Center tab is ideal for imprinting
- Single lens design with integral side shields for greater orbital seal
- scratch-resistant lens
- 99.9
-
UNSPSC46181802
-
Standards/ApprovalsANSI Z87.1-2003|CSA Z94.3|AS/NZS1337
Recently Viewed
MCR Safety 99110 Excalibur® Value Lightweight Single Lens Safety Glasses With Side Shields, Duramass® Hard Coat, Clear Lens, Half-Frame Frame, Gold, Nickel Silver Frame, Polycarbonate Lens, ANSI Z87.1-2003, CSA Z94.3, AS/NZS1337
3" 90-DEGREE BLACK STREET ELBOW-JPW3BSTE >
MORSE® 57909 5943 Center Cutting Regular Length Single End End Mill, 9/64 in Dia Cutter, 9/16 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 2 in OAL, Bright
Deep Groove Ball Bearings (DGBB) are the most common form of rolling bearings and are used in a variety of applications, particularly those where high speeds and low power loss are required. NSK DGBB can handle not only radial forces, but also moderate axial loads in both directions. They are easy to install and can be deployed in a variety of configurations.
3/8" X 50' COIL AIR HOSES
I.D.--3/8"
LENGTH--50'
FITTING--3/8" 2-RIGID
WALL THICKNESS--.062+/-.004
WORKING PRESSURE AT 70-DEGREES-F--230-PSI
COLOR--BLUE
HEAVY WALLS PROVIDE ADDITIONAL PROTECTION AGAINST OIL, GREASE,
GASOLINE AND ABRASION AS WELL AS INCREASED WORKING PRESSURE.
Morse® 177764 MHS Advanced Hole Saw, 4-3/4 in Dia, 1-15/16 in D Cutting, M42 HSS-Co 8 Cutting Edge, 5/8-18 Arbor
The all new advanced bi-metal hole saw by M.K. Morse®. Our latest sawing innovation replaces all current Morse bi-metal hole saw solutions into one, simple optimized powerhouse. Arbor required.
