Pyramex® S2580S Lightweight Safety Eyewear, Anti-Scratch, Indoor/Outdoor Mirror Lens, Wrap Around Frame, Matte, Polycarbonate Frame, ANSI Z87.1, CAN/CSA Z94.3-15, CE EN166, MIL-PRF 32432
Pyramex® S2580S Lightweight Safety Eyewear, Anti-Scratch, Indoor/Outdoor Mirror Lens, Wrap Around Frame, Matte, Polycarbonate Frame, ANSI Z87.1, CAN/CSA Z94.3-15, CE EN166, MIL-PRF 32432
-
BrandPyramex®
-
UPC814992004874
-
Manufacturer Part NumberS2580S
-
CountryUSA
-
Temple StyleNon-Slip Rubber/Soft
-
Frame ColorMatte
-
Frame MaterialPolycarbonate
-
Frame TypeWrap Around
-
TypeLightweight
-
UV ProtectionYes %
-
SizeUniversal
-
Specifications MetANSI Z87.1, CAN/CSA Z94.3-15, CE EN166, MIL-PRF 32432
-
Lens CoatingAnti-Scratch
-
Lens ColorIndoor/Outdoor Mirror
-
Lens MaterialPolycarbonate
-
Bridge Size13 mm
- Integrated nosepieces
- Soft, non-slip rubber temple tips provide non-binding fit
- Economical wraparound single lens provides full panoramic view
- Scratch-resistant polycarbonate lens provides 99% UVA/B/C protection
- 99
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 29XT68 |
| Grainger | 29XT68 |
| Grainger | 29XT68 |
-
UNSPSC46181802
-
Standards/ApprovalsANSI Z87.1+|CAN/CSA Z94.3|CE EN166
-
Specification Sheet
Recently Viewed
Pyramex® S2580S Lightweight Safety Eyewear, Anti-Scratch, Indoor/Outdoor Mirror Lens, Wrap Around Frame, Matte, Polycarbonate Frame, ANSI Z87.1, CAN/CSA Z94.3-15, CE EN166, MIL-PRF 32432
Pyramex® S2580S Lightweight Safety Eyewear, Anti-Scratch, Indoor/Outdoor Mirror Lens, Wrap Around Frame, Matte, Polycarbonate Frame, ANSI Z87.1, CAN/CSA Z94.3-15, CE EN166, MIL-PRF 32432
Pyramex® SB7180S Safety Eyewear, Anti-Scratch, Indoor/Outdoor Mirror Lens, Black, Polycarbonate Frame, ANSI Z87.1, AS/NZS 1337, CE EN166, MIL-PRF-32432
Pyramex® SB7180S Safety Eyewear, Anti-Scratch, Indoor/Outdoor Mirror Lens, Black, Polycarbonate Frame, ANSI Z87.1, AS/NZS 1337, CE EN166, MIL-PRF-32432
Gates® Power Transmission Poly Chain® GT®2 8MX-38S-21 Synchronous Sprocket, 1/2 to 1-11/16 in Taper-Lock® Bore, 3.747 in OD, 38 Grooves, 3.81 in Dia Pitch, 1.2 in W Face
Poly Chain GT sprockets use the tooth profile designed and developed by Gates and function with Gates Poly Chain GT belts in all existing constructions. These sprockets are statically balanced to make sure the entire belt drive is as safe as possible. Furthermore, they are manufactured, specified, and tested to perfectly support the full power capabilities of the Gates Poly Chain belt product range. Belts and sprockets used together get the best out of your belt drive: maximum performance, prolonged antistatic properties and optimal lifetime.
Sometimes you want to extend drying times to create a hard, protective and glossy finish. That's when Klean-Strip™ xylene can be used in place of toluene to thin specified oil based paint, lacquer, varnish, epoxy, adhesives and synthetic enamels. Xylene will also remove certain adhesives and is an excellent solvent for cleaning up spills, as well as tools and equipment immediately after use.
