Pyramex® SS4585D Lightweight Safety Eyewear, Anti-Scratch, Ice Blue Mirror Lens, Silver, Polycarbonate Frame, ANSI Z87.1-2003
Pyramex® SS4585D Lightweight Safety Eyewear, Anti-Scratch, Ice Blue Mirror Lens, Silver, Polycarbonate Frame, ANSI Z87.1-2003
-
BrandPyramex®
-
UPC814992009718
-
Manufacturer Part NumberSS4585D
-
CountryUSA
-
Temple StyleStraight Back/Flexible
-
Frame ColorSilver
-
Frame MaterialPolycarbonate
-
TypeLightweight
-
UV ProtectionYes %
-
SizeUniversal
-
Specifications MetANSI Z87.1-2003
-
Lens CoatingAnti-Scratch
-
Lens ColorIce Blue Mirror
-
Lens MaterialPolycarbonate
-
Bridge Size14.27 mm
- Vented frame increases air flow to prevent fogging
- Built in rubber nose pads provide comfort fit and protect against slipping
- Lightweight sports styling contours to the face to provide maximum protection
- Scratch-resistant polycarbonate lens provides 99% UVA/B/C protection
- 3 thin holes on the frame, one in the middle, one in left edge and one in the right edge
- Stainless steel standard hinge screw
- 8 base curve, cut lens attached to frame, lens half covered in left and right edge of lens
- 99
-
UNSPSC46181802
-
Standards/ApprovalsANSI Z87.1-2003
-
Specification Sheet
Recently Viewed
Pyramex® SS4585D Lightweight Safety Eyewear, Anti-Scratch, Ice Blue Mirror Lens, Silver, Polycarbonate Frame, ANSI Z87.1-2003
Pyramex® SS4585D Lightweight Safety Eyewear, Anti-Scratch, Ice Blue Mirror Lens, Silver, Polycarbonate Frame, ANSI Z87.1-2003
Gates® Power Transmission Hi-Power® II PowerBand® 6/B133 Banded Heavy Duty V-Belt, B Section, 21/32 in W Top, 136 in L Outside, 13/32 in THK, EPDM
The PowerBand® construction allows multiple belts to function as a single unit, with even load distribution and each strand fitting securely in the sheave groove.
Pyramex® SSG1810S Safety Eyewear, Anti-Scratch, Clear Lens, Wrap Around Frame, Slate Gray, Nylon 6.6 Frame, Polycarbonate Lens, ANSI P Z87.1, CAN/CSA Z94.3-15, CE EN166, MIL-PRF 32432
Pyramex® SSG1810S Safety Eyewear, Anti-Scratch, Clear Lens, Wrap Around Frame, Slate Gray, Nylon 6.6 Frame, Polycarbonate Lens, ANSI P Z87.1, CAN/CSA Z94.3-15, CE EN166, MIL-PRF 32432
Permatex® by Diversitech 81409 High Temperature Non-Flammable Non Toxic RTV Gasket Maker, 11 oz Cartridge
Permatex® Hi-Temp RTV Silicone Gasket is a single component, room temperature vulcanizing gasketing compound designed to provide reliable formed-in-place gaskets for mechanical assemblies. This material cures on exposure to moisture in the air to form a tough, flexible, silicone rubber gasket. The product resists aging, weathering and thermal cycling without hardening, shrinking or cracking. Designed to maintain maximum performance in a continuous temperature environment of 600 deg F.
sellstrom® S88200 Indirect Vent Chemical Splash Goggles, Uncoated Clear Polycarbonate Lens, Elastic Strap, ANSI Z87.1-2003, CAN/CSA-Z94.3
KleenGuard™ Personal Protective Equipment (PPE) enables rather than inhibits - allowing for maximum productivity and safety for you and your employees. Protect your team and yourself from splashes with the KleenGuard™ V80 Monogoggle. The safety splash goggles give you eye protection from liquids with a two-piece frame which includes a separate soft, cushioning nose piece for enhanced comfort and fit. The goggles have indirect ventilation for increased airflow, which also minimizes condensation and fogging. Headband buckles are located toward the rear of the goggles to limit peripheral vision interference. The anti-fog goggles are clear (with a green frame), making them ideal for indoor use and maximum light transmission and they fit over most prescription eyeglasses. The polycarbonate lenses are hard coated for scratch resistance and longer life and they provide 99.9% UVA/UVB/UVC protection. The splash safety goggles meet the ANSI Z87.1+ standards for impact, with a D3 rating for droplet and splash protection. Making the right Personal Protection choice is difficult. Perform with distinction with KleenGuard™ Personal Protective Equipment (PPE).
MORSE® 12046 1330L General Purpose Jobber Length Drill Bit, 17/64 in Drill - Fraction, 0.2656 in Drill - Decimal Inch, 118 deg Point, HSS, Bright
MORSE® 12046 1330L General Purpose Jobber Length Drill Bit, 17/64 in Drill - Fraction, 0.2656 in Drill - Decimal Inch, 118 deg Point, HSS, Bright
