Pyramex SLATE GRAY/CLR-LENS SAFETY GLASSES PSP SSG-1810-S
Pyramex® SSG1810S Safety Eyewear, Anti-Scratch, Clear Lens, Wrap Around Frame, Slate Gray, Nylon 6.6 Frame, Polycarbonate Lens, ANSI P Z87.1, CAN/CSA Z94.3-15, CE EN166, MIL-PRF 32432
-
BrandPyramex®
-
UPC814992003518
-
Manufacturer Part NumberSSG1810S
-
CountryUSA
-
Temple StyleAdjustable Ratchet
-
Frame ColorSlate Gray
-
Frame MaterialNylon 6.6
-
Frame TypeWrap Around
-
UV ProtectionYes %
-
Specifications MetANSI P Z87.1, CAN/CSA Z94.3-15, CE EN166, MIL-PRF 32432
-
Lens CoatingAnti-Scratch
-
Lens ColorClear
-
Lens MaterialPolycarbonate
-
Bridge Size10.5 mm
- Temples adjust to four different lengths
- Nose buds secure the glass and prevent slipping
- 9.75 base curved lens provides full side protection without distracting seams or traditional type side shields
- Scratch-resistant polycarbonate lens provides 99% UVA/B/C
- 99
-
UNSPSC46181802
-
Specification Sheet
Recently Viewed
Pyramex® SSG1810S Safety Eyewear, Anti-Scratch, Clear Lens, Wrap Around Frame, Slate Gray, Nylon 6.6 Frame, Polycarbonate Lens, ANSI P Z87.1, CAN/CSA Z94.3-15, CE EN166, MIL-PRF 32432
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
Browning® 1296987 Tightener Shaft, 1-1/2 in Dia x 6 in L Shaft, 7-11/16 in OAL
Browning® 1296987 Tightener Shaft, 1-1/2 in Dia x 6 in L Shaft, 7-11/16 in OAL
GENERAL® 36/37 Precision Drill Guide, For Use With 3/8 in or 1/2 in Power Drills, 3/8 in Chuck
GENERAL® 36/37 Precision Drill Guide, For Use With 3/8 in or 1/2 in Power Drills, 3/8 in Chuck
ELECTRIC WIRE TERMINALS-DEL432115 >
