Pyramex PMXTREME BLK/CLR-LENS W/CORD & LED PSP SB-6310-SP-LED
Pyramex® SB6310SPLED Safety Eyewear, Anti-Scratch, Clear Lens, Black, Plastic Frame, Polycarbonate Lens, ANSI Z87.1
-
BrandPyramex®
-
UPC814992005529
-
Manufacturer Part NumberSB6310SPLED
-
CountryUSA
-
Temple StylePivoting LED/Rubber Tipped
-
Frame ColorBlack
-
Frame MaterialPlastic
-
UV ProtectionYes %
-
Specifications MetANSI Z87.1
-
Lens CoatingAnti-Scratch
-
Lens ColorClear
-
Lens MaterialPolycarbonate
-
Bridge Size14 mm
- Built in rubber nosepiece
- Rubber temple tips keep eyewear secure for the active worker
- The L1154 alkaline batteries provides up to 50 hrs of use before replacing
- Easy to use push button on/off switches are located at the top-of each temple
- Scratch-resistant polycarbonate lens provides 99% UVA/B/C protection
- The super bright pivoting LED bulbs (3 lumens per side) help you to see in dark places while keeping your hands-free to do other task
- 9 base curve lens
- 99
-
UNSPSC46181802
-
Standards/ApprovalsANSI Z87.1
-
Specification Sheet
Recently Viewed
Pyramex® SB6310SPLED Safety Eyewear, Anti-Scratch, Clear Lens, Black, Plastic Frame, Polycarbonate Lens, ANSI Z87.1
3/8" X 3" M/D OVAL DIE SPRINGS-LANSMDO375300 >
Browning® 1045491 VP Series Type 2 Variable Pitch Sheave, 7/8 in Finished Bore, 5.35 in OD, 1 Groove, 3.9 to 4.7 in (3L)/4.2 to 5.2 in (A/4L)/4.4 to 5.4 in (B/5L) Dia Pitch, 3/4 to 1-1/8 in W Face
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.
Designed for rapid cutting of 2 in (50 mm) to 12 in (300 mm) steel pipe, heavy-wall steel pipe and cast-iron pipe.
Campbell® 6423108 GX Series Structural Short Leg Plate Clamp, 2 ton Load, 1/16 to 7/8 in Jaw Opening, 5-1/8 in OAW, Forged Steel, Load Activated Locking
Campbell® can trace its beginnings back to 1834, when one of the many companies that eventually became what is today the Campbell® brand began manufacturing harnesses for horses. Over the years, countless products were added, including wire rope and chain fittings, drop forged chain hardware, high quality tackle blocks, shackles, hooks and much more.
Dichtomatik N70013 O-Ring, 013 Dash Number, 0.426 in ID x 0.566 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
