15-BY-80 GATEWAY SAFETY
BURGUNDY FRAME COBRA SAFETY GLASSES-GSI15BY80>
Recently Viewed
BURGUNDY FRAME COBRA SAFETY GLASSES-GSI15BY80>
Bayco® KW-130 Heavy Duty Cord Storage Reel, Thermoplastic, Orange
The Heavy-Duty Cord Storage Reel w/Center Spin Handle is one of the fastest and simplest ways to organize, store and use your extension cords. The hand slide mechanism and swivel handle make it quick and easy to wind and unwind 16/3 extension cords up to 150 feet in length. Feed one end of your extension cord into one of the plug capture holes, then wind up your cord. That way you only have to unwind as much as the job dictates. This cord storage reel even has a built in stand to help keep this clever cord storage reel upright. Made from shatter and temperature resistant thermoplastic, the Heavy-Duty Cord Storage Reel will hold up to the elements year after year.
Gates® Power Transmission PowerGrip® 1400H200 Heavy Timing Belt, 2 in W, 140 in OAL, 1/2 in Pitch, 280 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
8-OZ ESTER OIL W/UV DYE
Milton® s-976 900 Standard Dual Head Chuck Service Gauge, 10 to 160 psi Pressure, Brass Body, 12-3/4 in OAL, 2 lb Resolution
Dual chuck head Service Gauge has a maximum pressure of 160 psi. Milton® precision engineered Service Gauges provide accurate, long life and trouble-free performance. Plated brass tube and 4 sided nylon indicator bar. 100% Calibrated across all three psi ranges before leaving the factory.
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
