Black Stallion® F9-21CS-L F9-21CS FR Cotton Cape Sleeve, L, Green, Cotton, Snap Front/Wrist Closure
The Black Stallion F9-21CS FR Cotton Cape Sleeves provides protection against sparks and splatter. The F9-21CS is made with 9 oz. flame-resistant treated cotton, and features snaps on the front and wrists and a scribe pocket.
-
BrandBlack Stallion®
-
UPC013332030133
-
Manufacturer Part NumberF9-21CS-L
-
CountryUSA
-
MaterialCotton
-
Closure TypeSnap Front/Wrist
-
ColorGreen
-
SeriesF9-21CS
-
SizeL
-
Fabric Weight9 oz
- 9 oz flame-resistant treated cotton sleeves
- Scribe pocket on left sleeve
-
Package Description24/CS
-
Standards/ApprovalsASTM D6413 (FR Fabric Tested to)
-
Alternative Part Number60-3013
-
Specification Sheet
Recently Viewed
Black Stallion® F9-21CS-L F9-21CS FR Cotton Cape Sleeve, L, Green, Cotton, Snap Front/Wrist Closure
The Black Stallion F9-21CS FR Cotton Cape Sleeves provides protection against sparks and splatter. The F9-21CS is made with 9 oz. flame-resistant treated cotton, and features snaps on the front and wrists and a scribe pocket.
Coilhose® N38-12B Coiled Air Hose, 3/8 in Nominal, 3/8 in MPT Swivel End Style, 12 ft L, 165 psi at 70 deg F Working, Nylon, Domestic
Coilhose® N38-12B Coiled Air Hose, 3/8 in Nominal, 3/8 in MPT Swivel End Style, 12 ft L, 165 psi at 70 deg F Working, Nylon, Domestic
Alemite® 7584 Grease Gun, 9 oz Cartridge, 4200 psi psi Operating, Manual Push Drive
NIBCO® 830-030, 3 in nominal, FNPT end style, SCH 80/XH, PVC, Domestic
SHOP-VACUUM CLEANER DISC FILTER-JWH344117 >
Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
