Disposable Hats, Hairnets & Beard Covers
Polypropylene disposable clothing provides affordable, light weight protection against non-hazardous dry particulates like dirt. Good for use in pharmaceuticals, medical, law enforcement and laboratory.
PIP® UB-21-1000 UB-1000 Lightweight Disposable Bouffant Cap, 21 in, White, Spunbond Polypropylene
Polypropylene disposable clothing provides affordable, light weight protection against non-hazardous dry particulates like dirt. Good for use in pharmaceuticals, medical, law enforcement and laboratory.
18" BLUE BEARD COVERS--CS/500-CPPBECLBLU>
18" WHITE BEARD COVERS--BOX OF 500-CPPBECL >
28" WHITE BOUFFANT CAPS--BAG/100-CPPBC35>
24" GREEN BOUFFANT CAPS--CS/1000-CPPBC24G>
24 WHITE BOUFFANT CAPS--BOX OF 500-CPPBC24 >
18" WHITE BOUFFANT CAPS--BOX OF 1000-CPPBC18 >
21" BOUFFANT HAIR COVER (EA)-CHR6013 >
21" WHITE BEARD COVERS--CS/1000-CPP31X>
21" WHITE BOUFFANT CAPS-BNDL/100-CPP30100>
18" BLUE NYLON HAIRNETS--CS/1000-109HPI18BL>
Recently Viewed
3/8-B-45-STE 3/8" 45-degree Black Street Elbow
3/8" 45-DEGREE BLACK STREET ELBOW
Browning® Classical Gripbelt® 1028372 BK Series Type 3 Single Groove Sheave, Finished Bore, 1/2 in Dia Bore, 4-3/4 in OD, 4.2 in (A)/4.7 in (B) Dia Pitch, 7/8 in W Face
1 GALLON OF DAD'S EASY SPRAY PAINT REMOVER-JWH773786 >
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
Linergy NEMA fuse holders are panel mount fuse holders that will accept class H, R, CC, M, and J fuses up to 200 Amps. This three pole fuse holder will accept class R fuses. The rating of the fuse can be up to 60 Amps with a 600 V maximum rating. The box lug connectors will accept 14 to 10 AWG (2.5 to 4 mm2) solid or stranded copper wire. Fuse clips are made of a copper alloy that is tin plated. The fuse clips are reinforced for a better connection. The fuse holder base is made of general purpose phenolic. AIC Rating in accordance with UL512 is 200,000 Amp. This fuse holder is UL listed and CSA certified.
RIDGID® 47785 Pipe Die, 1/2 in Conduit/Pipe, 1/2-3/4-14 NPT Thread, Right Thread, 4 Pieces, For Use With 504A, 711, 713, 811A, 815A, 816, 817 and 842 Universal Die Heads, HSS
RIDGID® 47785 Pipe Die, 1/2 in Conduit/Pipe, 1/2-3/4-14 NPT Thread, Right Thread, 4 Pieces, For Use With 504A, 711, 713, 811A, 815A, 816, 817 and 842 Universal Die Heads, HSS
