Black Stallion® 6X8VF1-SH8 Standard Quickframe Set Screen and Frame, 6 x 8 ft, 14 mil THK, Vinyl, Shade 8
QuickFrame™ Standard Screens provide a lightweight solution to portable protection of workers, bystanders, materials, and equipment near active welding. They create a physical barrier that keeps sparks and flying debris contained, while shielding those in the immediate vicinity from the dangerous UV light and radiation produced by a welding torch. The Black Stallion Saf-Vu™ 14 mil. Translucent Vinyl & Standard QuickFrame™ Welding Frame Set blocks most UV Radiation, Inhibits viewing from passerby.
-
BrandBlack Stallion®
-
UPC013332451785
-
Manufacturer Part Number6X8VF1-SH8
-
CountryUSA
-
Thickness14 mil
-
MaterialVinyl
-
Frame MaterialGalvanized Steel
-
CoatingPowder Coated
-
ColorShade 8
-
TypeSet
-
Connection MethodQuick-Snap Fit/Grommets
-
SeriesStandard Quickframe
-
Size6 x 8 ft
- Snap-fit design for quick and easy assembly without tools
- Sturdy platform legs provide enhanced stability
- Call for custom sizes and configurations
- Call for custom sizes and configurations
- Sizes 6 in x 6 in, 6 in x 8 in, 6 in x 10 in
-
Package DescriptionEACH
-
Standards/ApprovalsNFPA 701|California Fire Marshal
-
Alternative Part Number64-5178
Recently Viewed
Black Stallion® 6X8VF1-SH8 Standard Quickframe Set Screen and Frame, 6 x 8 ft, 14 mil THK, Vinyl, Shade 8
QuickFrame™ Standard Screens provide a lightweight solution to portable protection of workers, bystanders, materials, and equipment near active welding. They create a physical barrier that keeps sparks and flying debris contained, while shielding those in the immediate vicinity from the dangerous UV light and radiation produced by a welding torch. The Black Stallion Saf-Vu™ 14 mil. Translucent Vinyl & Standard QuickFrame™ Welding Frame Set blocks most UV Radiation, Inhibits viewing from passerby.
IKO IRB1816 Inch Series Inner Ring, 1-1/8 in ID x 1-3/8 in OD, 25.78 mm OAW, For Use With BA2216Z and BHA2216Z Shell Type Needle Roller Bearing, High Carbon Steel
Inner Rings can be integrated with shell-type or various machined needle roller bearings to provide good roller support without worrying about premature shaft wear. We heat-treat and grind our Inner Rings to tight tolerances to create hard, tough raceways for applications where it is impossible to make shaft surfaces to a specific hardness or roughness attribute. They're an economical alternative to bushings because they don't require any additional machining. Wide Inner Rings are also available to accommodate shafts that move axially or seals that are adjacent to bearings. Inner Rings come in a broad range of shaft diameters and assembly elements include small chamfers or gentle taper relief options. These rings are designed to provide a durable surface for shell-type needle roller bearings with non-machined raceways in-type IRB series shaft diameters range from 5/16 to 2-1/2 in.
Carlon® Flex-Plus® Blue™ 12005-200 Electrical Non-Metallic Tubing, 1/2 in Trade, 0.56 in ID x 0.84 in OD, 200 ft L, PVC
Flex-Plus® Blue™ ENT is a non-metallic flexible raceway for use in walls, floors and non-plenum ceilings. It lightweight hand bendable and free from sharp edges, which reduces installation time and saves money.
Wilton® Tradesman WL9-28807 Vise, Reversible Jaw, 6 in Jaw Opening, 6-1/2 in W Steel Jaw, 4 in D Throat
The tradesman round channel vise is designed to handle the most demanding clamping applications. unlike most vises that have a fixed center nut the tradesman round channel vise nut is anchored at the rear which provides straight line pull and even pressure resulting in greater durability. The round channel design also allows for a completely enclosed spindle and nut assembly keeping debris out and lubrication in for a lifetime of smooth operation. For ultimate versatility, the tradesman vise is equipped with main jaws, pipe jaws and a machined anvil work surface.
IKO LRB324024 Inch Series Inner Ring With Oil Groove, 2 in ID x 2-1/2 in OD, 38.35 mm OAW, For Use With BR405224 Machined Type Needle Roller Bearing, High Carbon Steel
Inner Rings can be integrated with shell-type or various machined needle roller bearings to provide good roller support without worrying about premature shaft wear. We heat-treat and grind our Inner Rings to tight tolerances to create hard, tough raceways for applications where it is impossible to make shaft surfaces to a specific hardness or roughness attribute. They're an economical alternative to bushings because they don't require any additional machining. Wide Inner Rings are also available to accommodate shafts that move axially or seals that are adjacent to bearings. Inner Rings come in a broad range of shaft diameters and assembly elements include small chamfers or gentle taper relief options. Inner Rings for machined-type needle roller bearings come in a variety of dimensions. Inch-type LRB series Inner Rings offer shaft diameters from 3/8 to 3-3/4 in and oil-hole versions for easier lubrication.
Our most powerful tools just got better with the FLEXVOLT® 60V MAX* 7-1/4 in cordless circular saw with electric brake. It has up to 47% more power than the DCS575 60V MAX* circular saw with 2456 unit watts out. It combines the power of a corded circular saw with the portability and convenience of cordless thanks to revolutionary DeWALT® FLEXVOLT® technology that offers a no load speed of 5800 rpm. Battery and charger sold separately.
