Master Lock® 411ORJ Zenex™ 411 Lockout Padlock, Different Key, Orange, Thermoplastic Body, 1/4 in Dia x 1-1/2 in H x 25/32 in W Hardened Steel Shackle, 3 in L Body
411 thermoplastic safety padlock. 1-1/2 in (3.8cm) wide 3 in (7.6cm) tall thermoplastic orange body, shackle with 1-1/2 in (3.8cm) clearance. Designed exclusively for Lockout/Tagout applications. Durable, lightweight, non-conductive Thermoplastic lock body. Customize on-site with permanent, write-on labels. Compliance with OSHA inone employee, one lock, one key in directive. High security, reserved-for-safety cylinder. Key retaining-ensures that padlock is not left unlocked. Keyed different 6-pin tumbler cylinder. commercial boxed packaging, shelf pack quantity 6, master carton quantity 36.
-
BrandMaster Lock®
-
UPC071649079078
-
Manufacturer Part Number411ORJ
-
CountryUSA
-
Locking Mechanism6-Pin Tumbler Cylindrical
-
ColorOrange
-
SeriesZenex™ 411
-
Shackle Diameter1/4 in
-
Shackle Height1-1/2 in
-
Shackle MaterialHardened Steel
-
Shackle Width25/32 in
-
Key TypeDifferent
-
Body Length3 in
-
Body MaterialThermoplastic
-
Body Width1-1/2 in
-
LegendDanger Locked Out Do Not Remove
- Durable, lightweight, non-conductive thermoplastic lock body
- 6-pin tumbler with over 40000 available key changes cylinder
- Customize on-site with permanent, write-on labels
- Compliance with "one employee, one lock, one key" directive
- Key retaining ensures that padlock is not left unlocked
- High security, reserved for safety cylinder
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 4FG09 |
-
UNSPSC46171501
-
IncludesKey
-
Package DescriptionEACH
-
Standards/ApprovalsUL Listed|OSHA 1910.147
-
WarrantyLifetime Limited
-
Warranty Information
Recently Viewed
Master Lock® 411ORJ Zenex™ 411 Lockout Padlock, Different Key, Orange, Thermoplastic Body, 1/4 in Dia x 1-1/2 in H x 25/32 in W Hardened Steel Shackle, 3 in L Body
411 thermoplastic safety padlock. 1-1/2 in (3.8cm) wide 3 in (7.6cm) tall thermoplastic orange body, shackle with 1-1/2 in (3.8cm) clearance. Designed exclusively for Lockout/Tagout applications. Durable, lightweight, non-conductive Thermoplastic lock body. Customize on-site with permanent, write-on labels. Compliance with OSHA inone employee, one lock, one key in directive. High security, reserved-for-safety cylinder. Key retaining-ensures that padlock is not left unlocked. Keyed different 6-pin tumbler cylinder. commercial boxed packaging, shelf pack quantity 6, master carton quantity 36.
MACHINIST® 3734SNL 3734N High Performance Gloves, L, 13 ga HPPE/Fiberglass, Resists: Abrasion, Cut, Heat, Puncture and Tear, ANSI Cut-Resistance Level: A4, ANSI Puncture-Resistance Level: A3
MACHINIST® 3734SNL 3734N High Performance Gloves, L, 13 ga HPPE/Fiberglass, Resists: Abrasion, Cut, Heat, Puncture and Tear, ANSI Cut-Resistance Level: A4, ANSI Puncture-Resistance Level: A3
MACHINIST® 3734SNXXL 3734N High Performance Gloves, 2XL, 13 ga HPPE/Fiberglass, Resists: Abrasion, Cut, Heat, Puncture and Tear, ANSI Cut-Resistance Level: A4, ANSI Puncture-Resistance Level: A3
MACHINIST® 3734SNXXL 3734N High Performance Gloves, 2XL, 13 ga HPPE/Fiberglass, Resists: Abrasion, Cut, Heat, Puncture and Tear, ANSI Cut-Resistance Level: A4, ANSI Puncture-Resistance Level: A3
MCR Safety 9700L Consolidator® 9700 Industrial Grade Gloves, L, 7 ga Cotton/Nitrile/Polyester, Slip-On Cuff, Resists: Abrasion, Cut, Puncture and Tear, Paired Hand
MCR Safety 9700L Consolidator® 9700 Industrial Grade Gloves, L, 7 ga Cotton/Nitrile/Polyester, Slip-On Cuff, Resists: Abrasion, Cut, Puncture and Tear, Paired Hand
Machinist® 3734M 3734 High Performance Cut Resistant Gloves, M, Fiberglass/HPPE, Knit Wrist Cuff, Resists: Abrasion, Cut and Snag, ANSI Cut-Resistance Level: A4
Machinist® 3734M 3734 High Performance Cut Resistant Gloves, M, Fiberglass/HPPE, Knit Wrist Cuff, Resists: Abrasion, Cut and Snag, ANSI Cut-Resistance Level: A4
MCR Safety 92735NM Cut Pro™ Cut-Resistant Gloves, M, Nitrile Foam Coating, HyperMax™/Steel, Knit Wrist Cuff, Resists: Abrasion, Cut, Heat, Dirt, Grease and Puncture, ANSI Cut-Resistance Level: A9, ANSI Puncture-Resistance Level: 5
MCR Safety CutPro® 15-Gauge HyperMax® HPPE Shell Cut, Abrasion, and Puncture Resistant Nitrile Coated Palm and Fingertips Nitrile foam coated HyperMax® HPPE and steel shell offers superior cut protection The MCR Safety CutPro® Series offers various cut protection levels at a competitive price. The 92735N work gloves feature a 15-gauge plaited black HyperMax® HPPE and steel shell. The shell is coated on the palm and fingers with soft black nitrile. The 92735N scores a “top of the chart” A9 cut protection level. This glove also provides excellent puncture and abrasion resistance. The reinforced thumb crotch provides extended use in a high-stress area, and the nitrile coating gives the user excellent gripping power. The black color hides dirt and grease to keep the gloves looking good longer. If you are looking for the best cut-resistant gloves at an affordable price, look no further than MCR Safety’s CutPro® options.
