Master Locks YELLOW KEYED ALIKE LOCKOUT PADLOCK MAS 410-KA-YLW
410 thermoplastic safety padlock. 1-1/2 in (3.8cm) wide 1-3/4 in (4.4cm) tall thermoplastic yellow body, shackle with 1-1/2 in (3.8cm) clearance. Designed exclusively for Lockout/Tagout applications. Durable, lightweight, non-conductive Thermoplastic lock body. Customize on-site with permanent, write-on labels. Compliance with OSHA inone employee, one lock, one key in directive. High security, reserved-for-safety cylinder. Key retaining-ensures that padlock is not left unlocked. Keyed alike 6-pin tumbler cylinder. commercial boxed packaging, shelf pack quantity 6, master carton quantity 36.
-
BrandMaster Lock®
-
UPC071649080432
-
Manufacturer Part Number410KAYLW
-
CountryUSA|Canada
-
Locking Mechanism6-Pin Tumbler Cylindrical
-
ColorYellow
-
SeriesZenexâ„¢ 410
-
Shackle Diameter1/4 in
-
Shackle Height1-1/2 in
-
Shackle MaterialSteel
-
Shackle Width25/32 in
-
Key TypeAlike
-
Body Length1-3/4 in
-
Body MaterialThermoplastic
-
Body Width1-1/2 in
-
LegendDanger Locked Out Do Not Remove
- Durable, lightweight, non-conductive thermoplastic lock body
- Customize on-site with permanent, write-on labels
- Compliance with
- Key retaining ensures that padlock is not left unlocked
- High security, reserved for safety cylinder
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 45JC73 |
-
UNSPSC46171501
-
Package DescriptionEACH
-
Standards/ApprovalsUL Listed|OSHA 1910.147
-
WarrantyLifetime Limited
-
Warranty Information
Recently Viewed
410 thermoplastic safety padlock. 1-1/2 in (3.8cm) wide 1-3/4 in (4.4cm) tall thermoplastic yellow body, shackle with 1-1/2 in (3.8cm) clearance. Designed exclusively for Lockout/Tagout applications. Durable, lightweight, non-conductive Thermoplastic lock body. Customize on-site with permanent, write-on labels. Compliance with OSHA inone employee, one lock, one key in directive. High security, reserved-for-safety cylinder. Key retaining-ensures that padlock is not left unlocked. Keyed alike 6-pin tumbler cylinder. commercial boxed packaging, shelf pack quantity 6, master carton quantity 36.
Campbell® T7615602 Round Swiveling Eye Spring Snap, 1/4 in, 2 in OAL, 1/4 in ID Eye, 20 lb Load, Nickel Plated
Campbell® can trace its beginnings back to 1834, when one of the many companies that eventually became what is today the Campbell® brand began manufacturing harnesses for horses. Over the years, countless products were added, including wire rope and chain fittings, drop forged chain hardware, high quality tackle blocks, shackles, hooks and much more.
1/2-TON L-100 10'-LIFT CHAIN HOIST
McGill® 0006400000 MI Series Standard Machined Separable Inner Ring With Oil Hole and Annular Groove, 4 in ID x 4.9985 in OD, 2.26 in OAW, For Use With GUIDEROL® GR 80, CAGEROL® MR 80 Bearing, Chrome Steel
Precision ground inner ring provides a hardened raceway for the rollers when used with an unhardened shaft. The ring contains an oil hole and annular groove for relubrication of the bearing and can be used with both CAGEROL® and GUIDEROL® bearings or can be utilized as a bushing in plain bearing applications.
3/8" X 8" STANDARD TIP SQUARE SHANK SCREWDRIVER
V-BELTOUTSIDE CIRCUMFERENCE 33.8"-JAS1922V338 >
