Brady® 65397 1-Pole Clamp-On Circuit Breaker Switch Lockout Device, For Use With 480/600 VAC Single Pole and Internal-Trip Multi-Pole Breaker, 1 Padlocks, 0.31 in Dia Max Padlock Shackle, LOTO-2 Polypropylene, Red
Brady® 65397 1-Pole Clamp-On Circuit Breaker Switch Lockout Device, For Use With 480/600 VAC Single Pole and Internal-Trip Multi-Pole Breaker, 1 Padlocks, 0.31 in Dia Max Padlock Shackle, LOTO-2 Polypropylene, Red
-
BrandBrady®
-
UPC754473653972
-
Manufacturer Part Number65397
-
CountryUSA|Canada
-
MaterialLOTO-2 Polypropylene
-
Maximum Number of Padlocks1
-
ColorRed
-
Type1-Pole Clamp-On
-
Height3.253 in
-
Width1.588 in
-
Depth2.175 in
-
Suitable For Use With480/600 VAC Single Pole and Internal-Trip Multi-Pole Breaker
-
Padlock Shackle Maximum Diameter0.31 in
- Clamp on breaker lockouts are versatile and easy to install using proprietary thumbscrew design no screwdrivers needed
- Equipping your employees with the proper lockout tools and warning devices can save lives, reduce lost employee time and cut insurance costs
- Brady is a world leader in lockout/tagout products and services offering industry expertise and a broad range of durable, easy to use lockout devices
- For use on breakers that do not have a hole in the switch tongue, including multi-pole breakers with tie bars
- Turn thumbscrew to clamp lockout securely onto switch, then snap the cover closed to prevent thumbwheel from being loosened
| Competitor Name | Competitor Part Number |
|---|---|
| MSC | 02860484 |
| MSC | 02860484 |
| MSC | 02860484 |
-
Alternative Part Number8384293
-
UNSPSC39121901
-
IDEA Index ID8384293
-
Package DescriptionEACH
-
Standards/ApprovalsANSI Z244.1|ASSE Z244.1|ECCN: EAR99|NFPA 704|NPCA-HMIS Rating|OSHA 29 CFR 1910.147 (4)(ii)( A)(1)/(c) (5)(ii)(C)(1)|UL 94 HB Flammability Rating|CSA Approved
-
Technical Bulletin
-
Specification Sheet
-
Owners/User Manual
-
Catalog
Recently Viewed
Brady® 65397 1-Pole Clamp-On Circuit Breaker Switch Lockout Device, For Use With 480/600 VAC Single Pole and Internal-Trip Multi-Pole Breaker, 1 Padlocks, 0.31 in Dia Max Padlock Shackle, LOTO-2 Polypropylene, Red
Brady® 65397 1-Pole Clamp-On Circuit Breaker Switch Lockout Device, For Use With 480/600 VAC Single Pole and Internal-Trip Multi-Pole Breaker, 1 Padlocks, 0.31 in Dia Max Padlock Shackle, LOTO-2 Polypropylene, Red
RIDGID® 31325 Heavy Duty Chain Wrench, 3 to 5 in Pipe, 24 in OAL, Alloy Steel Double End Jaw, Alloy Steel Handle
RIDGID® 31325 Heavy Duty Chain Wrench, 3 to 5 in Pipe, 24 in OAL, Alloy Steel Double End Jaw, Alloy Steel Handle
Proto® J000N Step Cut Feeler Gauge Set, 22 Pieces, 1/2 x 3-5/16 in Blade, Steel Holder
IKO BA108ZOH Inch Series Caged Shell Standard Needle Roller Bearing With Oil Hole and Dust Cover, 5/8 in Dia Bore, 13/16 in OD, 1 Row, 1/2 in W, 5420 N Dynamic/7310 N Static Load
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
Jones Stephens™ D06100 Dielectric Union, 1 in, FNPT x Solder, Forged Steel
Worms and worm gears are used to power right angle, non-intersecting shafts. In normal applications the worm gear is driven by the worm. The most popular use of worms and worm gears is in applications where high ratio speed reduction is desired in a relatively limited space. They are also used in applications where high resistance to the worm gear shaft reversing and driving back through the worm is desired.
