10-LBS 7018-AC-1/8 WELDING RODS - FOR30686
E7018 AC mild steel "Low Hydrogen" welding rod easily produces quality results on smaller amperage AC/DC welders. It is suitable for all positions on hardenable steels where no pre-heat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod. The low hydrogen content reduces cracking and peeling of the weld material. Features excellent restart capability. Designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel. For frames, trailer hitches and chassis.
Recently Viewed
E7018 AC mild steel "Low Hydrogen" welding rod easily produces quality results on smaller amperage AC/DC welders. It is suitable for all positions on hardenable steels where no pre-heat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod. The low hydrogen content reduces cracking and peeling of the weld material. Features excellent restart capability. Designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel. For frames, trailer hitches and chassis.
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
Morse® ZWEG083C610M42 Welded Band Saw Blade, 1 in W Blade x 0.035 in THK Blade, 6/10 TPI, Bi-Metal Blade, HSS Tooth
Morse® ZWEG083C610M42 Welded Band Saw Blade, 1 in W Blade x 0.035 in THK Blade, 6/10 TPI, Bi-Metal Blade, HSS Tooth
23-TOOTH #60-1 CHAIN SPROCKETS IDC 60-B-23-F1-15/16
23 TOOTH SPROCKETS FOR #60 CHAIN
Dichtomatik N2.50X016 O-Ring, 16 mm ID x 21 mm OD, Nitrile Rubber, 70 Shore A Durometer, Import, Custom H-2.5 X 16
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
ISOSTATIC™ Oilube® 401074 Sleeve Bearing, 0.377 in Dia Bore, 0.44 in OD, 1 in W
ISOSTATIC™ Oilube® 401074 Sleeve Bearing, 0.377 in Dia Bore, 0.44 in OD, 1 in W
