Precision Brand® 42325 Branded® Shim Plain Slotted Shim, 3 in L x 3 in W, 0.005 in THK, 300 Stainless Steel
Made from a 300 series stainless steel that resists rust and corrosion. Tab makes shim placement easier and safer, while eliminating the need to place hands under the machinery during installation or removal of shim. Each shim marked with thickness in decimal and metric. Precision Brand® Slotted shim is the best way to solve alignment and leveling problems on motors, pumps, generators and other plant machinery. Slotted shims are economical, safe and accurate. Reduce labor costs by eliminating hand cutting and reduce downtime by eliminating shim preparation.
-
BrandPrecision Brand®
-
UPC698158423255
-
Manufacturer Part Number42325
-
CountryUSA|Canada
-
Thickness0.005 in
-
Material300 Stainless Steel
-
TypePlain
-
Width3 in
-
SeriesBranded® Shim
-
Length3 in
- Made from a 300 series stainless steel that resists rust and corrosion
- Tab makes shim placement easier and safer, while eliminating the need to place hands under the machinery during installation or removal of shim
- Slotted shims are economical, safe and accurate
- Shims marked with thickness in decimal and metric
- Reduce labor costs by eliminating hand cutting and reduce downtime by eliminating shim preparation
- 0.00025 in minimum and maximum thickness tolerance
- Annealed temper
- 3/4 in W x 1-7/8 in D slot
- 11/16 in H x 11/16 in W tab
- C40-45 rockwell hardness
- Size B
- 5/8 in bolt size
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 381G31 |
| Fastenal | 7042525 |
-
UNSPSC31231403
-
Package Description20/PK
-
Standards/ApprovalsPROP65: Cancer. www.P65Warnings.ca.gov
Recently Viewed
Precision Brand® 42325 Branded® Shim Plain Slotted Shim, 3 in L x 3 in W, 0.005 in THK, 300 Stainless Steel
Made from a 300 series stainless steel that resists rust and corrosion. Tab makes shim placement easier and safer, while eliminating the need to place hands under the machinery during installation or removal of shim. Each shim marked with thickness in decimal and metric. Precision Brand® Slotted shim is the best way to solve alignment and leveling problems on motors, pumps, generators and other plant machinery. Slotted shims are economical, safe and accurate. Reduce labor costs by eliminating hand cutting and reduce downtime by eliminating shim preparation.
Dichtomatik N70366 O-Ring, 366 Dash Number, 7.225 in ID x 7.645 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
BBI 221097 Shoulder Screw, Round Socket Head, ASTM A574 Alloy Steel, 3/8 in Dia x 4 in L Shoulder, 5/16-18
BBI 221097 Shoulder Screw, Round Socket Head, ASTM A574 Alloy Steel, 3/8 in Dia x 4 in L Shoulder, 5/16-18
Sharkbite® U855W100 Tubing, 3/8 in Nominal, 0.35 in ID x 1/2 in OD x 100 ft Coil L x 0.07 in THK Wall, White, PEX, Domestic
SharkBite® PEX Pipe is a cross-linked polyethylene pipe used for potable water application. The pipe is printed with a SharkBite® imprint pattern that provides a visual aid to determine if the pipe has been inserted all the way into the SharkBite® Push-To-Connect (PTC) fitting. This feature only works if the pipe is cut between the SharkBite® imprint pattern.
Sintered steel bushing on which the center member and friction facings rides are coated with a dry film lubricant; therefore, no oil is present to contaminate friction facings and reduce torque capacity. The bushing "free floats" on the hub. Morse® offers a wide selection of bushing widths in all torque limiter sizes, permitting close matching of center member and bushing width to minimize bearing pressure and promote longer bushing life.
MORSE® 22174 1655 Chucking Reamer, 7/32 in Dia x 5 in OAL, 0.2075 in Dia Straight Shank, Straight Flute
MORSE® 22174 1655 Chucking Reamer, 7/32 in Dia x 5 in OAL, 0.2075 in Dia Straight Shank, Straight Flute
