Precision Brand® 16AF15 Shim Stock Assortment, 1008-1010 Full Hard Steel, 0.001 in THK Min, 0.031 in THK Max, 12 in L x 6 in W
6 x 12 in Assortment contains 1 each of the following thicknesses: 0.001 in, 0.0015 in, 0.002 in, 0.003 in, 0.004 in, 0.005 in, 0.006 in, 0.007 in, 0.008 in, 0.01 in, 0.012 in, 0.015 in, 0.02 in, 0.025 in and 0.031 in. Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance, mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
-
BrandPrecision Brand®
-
UPC698158166855
-
Manufacturer Part Number16AF15
-
CountryUSA|Canada
-
Material1008-1010 Full Hard Steel
-
Width6 in
-
Number of Pieces15
-
Length12 in
- Used in applications where hardness, flatness and accuracy are required
- Material can be punched or sheared with minimum burring and distortion
-
UNSPSC31231400
-
Includes(1) 0.0015 in, (1) 0.001 in, (1) 0.002 in, (1) 0.003 in, (1) 0.004 in, (1) 0.005 in, (1) 0.006 in, (1) 0.007 in, (1) 0.008 in, (1) 0.012 in, (1) 0.015 in, (1) 0.01 in, (1) 0.025 in, (1) 0.02 in and (1) 0.031 in Thickness
-
Package Description15/AST
-
Catalog
Recently Viewed
Precision Brand® 16AF15 Shim Stock Assortment, 1008-1010 Full Hard Steel, 0.001 in THK Min, 0.031 in THK Max, 12 in L x 6 in W
6 x 12 in Assortment contains 1 each of the following thicknesses: 0.001 in, 0.0015 in, 0.002 in, 0.003 in, 0.004 in, 0.005 in, 0.006 in, 0.007 in, 0.008 in, 0.01 in, 0.012 in, 0.015 in, 0.02 in, 0.025 in and 0.031 in. Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance, mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
EATON DG323NGB DG Series Cartridge Fusible General Duty Safety Switch, 240 V AC, 100 A, 7-1/2 to 15 hp, 15 to 30 hp, 3 Poles
General duty safety switches are used in residential and commercial applications. They are suitable for light duty motor circuits and service entrance applications. Fusible (plug or cartidge) and non-fusible switches are available.
TS TROLLEY-FRE1200AAT >
FLEETGUARD OPTI AIR FILTER, RADIAL SEAL OUTER AIR ELEMENT-FLTAF26124 >
15-GAL PAINT LINERS--BOX OF 8-GRC15D061 >
3/16" DIAMETERX3/4" DOWEL PIN-HOL01026 >
