1/8-G-T 1/8" -female Pipe Thread Metal Galvanized
1/8" -FEMALE PIPE THREAD METAL GALVANIZED TEE-FIT1/8GT >
Recently Viewed
1/8" -FEMALE PIPE THREAD METAL GALVANIZED TEE-FIT1/8GT >
Precision Brand® 21020 Solid Music Wire, #8 Wire, 0.02 in Dia x 937 ft L, High Carbon Steel Alloy
Precision Brand® music wire is spring tempered and made from high carbon steel alloy. High tensile strength and high fatigue resistance. Applications include springs, wire forms, control linkages, armature binding, ceramic cutting and a variety of industrial uses.
WERNER® 7124-2 7100-2 Round Rung Extension Ladder, 24 ft OAL, 375 lb Load, 12 in Adjustable Increments, Fiberglass, Type IAA
The 7124-2 fiberglass 24 ft extension ladder is made with non-conductive fiberglass side rails featuring TRACTION-TRED® slip resistant round rungs. The top of the fly section has pre-pierced holes for easy installation of accessories. Guides at the top of the base and internal guides at bottom of fly section securely interlock the rails. The plate and rung assemblies are riveted at four points to the side rails. The base and fly sections separate easily to use base section as a single ladder. Durable rail shield and shoe brackets protect rails from damage. These durable ladders boast a duty rating of 375 pounds.
1/2" X 36" REDI-CUT BLACK PIPE IS THREADED AND HAS THREAD PROTECTOR AT BOTH ENDS. THIS PIPE IS AVAILABLE ON DIRECT ORDERS IN GALVANIZED OR BLACK PIPE. SIZES AVAILABLE ARE 3/8" TO 2" IN 18" TO 60" LENGTHS IN 6" GRADUATIONS-JWH410120 >
Thomson® Super Smart Ball Bushing® SSU12OPN Adjustable Open Linear Bearing, 3/4 in Dia Shaft, 1-1/4 in OD, 1-5/8 in L
The Super Smart Ball Bushing® bearing family represents a major advancement in linear bearing technology worldwide. These patented and universally self-aligning bearings offer twice the load capacity or eight times the travel life of our industry standard Super Ball Bushing® bearing. To minimize installation time and cost, the Super Smart Ball Bushing® bearing can be ordered factory-installed in an industry standard single or twin pillow block.
DeWALT® Powers® 50096-PWR Standard Flat Head Drive Pin, 0.145 in Dia x 2 in L Shank, 0.3 in Dia Head
Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled shank designs are available for installations in thick steel base materials. A plastic flute is mounted on the pin shank to retain the drive pin in the barrel of the tool and provide guidance during the driving operation. The fasteners are also available in with a mechanically galvanized (MG) coating for use in treated lumber.
