APACHE 99000246 Automatic Shut-Off Unleaded Fuel Nozzle With 3/4 in Spout, 14.531 gpm at 43.45 psi, 3/4 in FNPT Inlet, 15 psi
This 3/4 in automatic shut-off fuel dispensing nozzle is compatible with most 3/4 in fuel hoses without the use of adapter fittings. The red vinyl covered handle provides improved operator comfort and product identification, while protecting the vehicle from scratches and knicks.
-
BrandAPACHE
-
UPC725559530074
-
Manufacturer Part Number99000246
-
CountryUSA
-
MaterialAluminum/Vinyl Handle
-
Pressure Rating15 psi
-
Flow Rate14.531 gpm at 43.45 psi
-
TypeAutomatic Shut-Off Unleaded
-
Inlet Size3/4 in FNPT
-
Length7 in
-
Suitable For Use WithGasoline, 15% Ethanol, Methanol and Gasoline Blends and Diesel Fuel
- Low profile aluminum body
- Full hang insulator protects nozzle and vehicle
- Flow control allows tank top off to exact amount and prevents overflows
-
UNSPSC40141731
-
Package Description6/PK
-
Standards/ApprovalsUL Approved
Recently Viewed
APACHE 99000246 Automatic Shut-Off Unleaded Fuel Nozzle With 3/4 in Spout, 14.531 gpm at 43.45 psi, 3/4 in FNPT Inlet, 15 psi
This 3/4 in automatic shut-off fuel dispensing nozzle is compatible with most 3/4 in fuel hoses without the use of adapter fittings. The red vinyl covered handle provides improved operator comfort and product identification, while protecting the vehicle from scratches and knicks.
Browning® 1064294 Single Groove Sheave, QD® Bore, 1/2 to 1-1/4 in Dia Bore, 3.15 in OD, 3.1 in Dia Pitch, 11/16 in W Face
7/8"-OD-TUBE BRASS COMPRESSION UNION - FTG262X14 >
Hard Hat 7715 and 7778 should be used on new, bare steel, blasted steel or light rusted steel surfaces or properly prepared painted substrates alike barbecue grills, fire place equipment, space heaters etc. Provides heat resistance up to 750 deg C (1380 deg F) dry heat (short term peak resistance) in sheltered or interior environments.
LOCTITE® 574 seals close-fitting joints between rigid metal faces and flanges. The product cures when confined in the absence of air between close-fitting metal surfaces. It provides resistance to low pressures immediately after assembly. Typically used as a form-in-place gasket on rigid flanged connections. The nature of LOCTITE 574 reduces the migration of liquid product after application to the substrate. It has a high oil tolerance and excellent water and glycol resistance.
Air Filter With Fin, 0.531 in Top/4.894 in Bottom ID x 9.218 in Top/11.531 in Bottom OD, 10-3/8 in H
