SPLIT TAPER BUSHED SPROCKETS
84-T Q-BUSH SPROCKET FOR #50 CHAIN-BRW50Q84>
96-TOOTH Q-BUSH #50 CHAIN SPROCKET-BRW50Q96>
112 TOOTH SPROCKETS FOR #60 CHAIN-BRW60Q112 >
60-Q-21 21 Tooth Sprockets For #60
21 TOOTH SPROCKETS FOR #60 CHAIN-BRW60Q21 >
34 TOOTH SPROCKETS FOR #60 CHAIN-BRW60Q34 >
38 TOOTH SPROCKETS FOR #60 CHAIN-BRW60Q38 >
41 TOOTH SPROCKETS FOR #60 CHAIN-BRW60Q41 >
44 TOOTH SPROCKETS FOR #60 CHAIN-BRW60Q44 >
50 TOOTH SPROCKETS FOR #60 CHAIN-BRW60Q50 >
54 TOOTH SPROCKETS FOR #60 CHAIN-BRW60Q54 >
70 TOOTH SPROCKETS FOR #60 CHAIN-BRW60Q70 >
80 TOOTH SPROCKETS FOR #60 CHAIN-BRW60Q80 >
96 TOOTH SPROCKETS FOR #60 CHAIN-BRW60Q96 >
32 TOOTH SPROCKETS FOR #80 CHAIN-BRW80Q32 >
33 TOOTH SPROCKETS FOR #80 CHAIN-BRW80Q33 >
42-TOOTH SPLIT-TAPERED SPROCKETS FOR #80 CHAIN -BRW80Q42 >
45 TOOTH SPROCKETS FOR #80 CHAIN-BRW80Q45 >
48 TOOTH SPROCKETS FOR #80 CHAIN-BRW80Q48 >
60 TOOTH SPROCKETS FOR #80 CHAIN-BRW80Q60 >
70 TOOTH SPROCKETS FOR #80 CHAIN-BRW80Q70 >
SPROCKETS-BRW80Q72>
40 TOOTH SPROCKETS FOR #80 CHAIN-BRW80R40 >
47 TOOTH SPROCKETS FOR #80 CHAIN-BRW80R47 >
70 TOOTH SPROCKETS FOR #80 CHAIN-BRW80R70 >
Recently Viewed
4" 8-TPI JIGSAW BLADES-BSHT127DF100>
METRIC GREASE FITTING ASSORTMENTS-LIC5184>
PIX BB-150 IS A DOUBLE-SIDED V-BELT, 154.6 OUTSIDE LENGTH, 21/32" TOP WIDTH, 17/32" THICKNESS 1 RIB
DOUBLE-V V-BELT OUTSIDE CIRCUMFERENCE 153-PIXBB150 >
SHELF-PNC12940C>
PIX BB-81 IS A DOUBLE-SIDED V-BELT, 85.6 OUTSIDE LENGTH, 21/32" TOP WIDTH, 17/32" THICKNESS 1 RIB
HEXAGONAL OR DOUBLE V BELTS ARE RECOMMENDED FOR SERPENTINE DRIVES, WHERE POWER IS TO BE TRANSMITTED FROM BOTH THE SIDES OF THE BELT. DOUBLE V BELTS ARE DESIGNED WITH SPECIAL TENSION CORD FOR MEETING DUAL POWER REQUIREMENT ALONG WITH MULTIPLE BENDS. THEY PROVIDE AMAZING TORQUE, STRENGTH, DURABILITY AND ARE USED ON DRIVES WITH MORE REVERSE BENDS.
-PIXBB81 >
Lock nut with inch thread, for locking by lock washer
AN lock nuts are used to locate bearings onto a shaft. They have inch threads and four, equally spaced slots around their circumference to accommodate a spanner. They should be locked by a lock washer to prevent unintentional loosening. AN lock nuts can be reused, provided they are not damaged.
Simple, stable and reliable fastening element
Easy to install and remove
Reusable with a new locking device
Require a keyway in the shaft or adaptor sleeve thread
