CG-100125-S APPLETON
CORD AND CABLE CONNECTOR, 1-1/4" HUB, 1-1/16" X 2-1/8, 1.000-1.125 CABLE RANGE,-APLCG100125S >
Recently Viewed
CORD AND CABLE CONNECTOR, 1-1/4" HUB, 1-1/16" X 2-1/8, 1.000-1.125 CABLE RANGE,-APLCG100125S >
SAE 8-n-1 Ratcheting Wrench Set: 5/16-Inch by 3/8-Inch, 7/16-Inch by 1/2-Inch, 9/16-Inch by 5/8-Inch, 11/16-Inch by 3/4-Inch-CHN841S>
Milwaukee® 48-20-5045 Heavy Duty Thin Wall Core Bit, 3 in Drill - Fraction, 3 in Drill - Decimal Inch
Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in. The inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) SDS Plus drive shank must be used to drive the core bit. Use 48-20-6155 center pin and 48-20-6159 guide plate for positioning and starting the hole. Thin wall core bits are available from 1 in. to 6 in. diameters. See thick wall core bits for cured concrete and/or larger hammers.
1-1/4" FINISHING 16 NAILS--BX/5000-PAS095205>
The MILWAUKEE® DIAMOND PREMIUM™ Wet Core Bits are designed to the highest standards, only using quality diamonds. Available in sizes 3/4" - 14", DIAMOND PREMIUM™ Wet Core Bits offer exceptional drilling life and speed in cured concrete with hard aggregate and medium steel reinforcement. Designed with a threaded cap for easily extending the core bit. Designed for use with MX FUEL™ Core Drills and corded core drills for maximum versatility. Sizes from ¾” – 1-1/2” are compatible with all core drills with a 5/8”-11 thread. Sizes from 2” – 14” are compatible with all core drills with a 1-1/4”-7 thread. Designed for wet use only.
Milwaukee® 48-20-5015 Heavy Duty Thin Wall Core Bit, 1-1/4 in Drill - Fraction, 1.25 in Drill - Decimal Inch
Milwaukee®'s SDS Plus thin wall core bits are used for drilling large through holes into brick, block, concrete. Includes core bit, guide plate, and centering pin.
