H-5015X7/8 15 Tooth Sprockets For #50
15 TOOTH SPROCKETS FOR #50 CHAIN-BRWH5015X7/8 >
Recently Viewed
15 TOOTH SPROCKETS FOR #50 CHAIN-BRWH5015X7/8 >
GearWrench® 86943 Combination Wrench, 3/8 in Wrench, 12 Points, 15 deg Offset, 6.673 in OAL, Alloy Steel, Polished Chrome, ANSI/ASME
GEARWRENCH 90-tooth ratcheting wrench swing arc of just 4° turns fasteners in extremely tight spaces. Longer, wider beam delivers improved reach, leverage, and comfort. Large color-coded SAE/metric markings make size identification easy. All exceed ASME performance specs and come with the trusted GEARWRENCH Full Lifetime Warranty.
BBI 857180 Case Hardened Hex Head Serrated Flange Locknut, 1/4-20, Low Carbon Steel, Zinc CR+3
BBI 857180 Case Hardened Hex Head Serrated Flange Locknut, 1/4-20, Low Carbon Steel, Zinc CR+3
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
Hougen® Copperhead™ 18002 Annular Cutter Kit, 9/16 in Dia Min Cutter, 1-1/16 in Dia Max Cutter, 2 in D Cutting, 9 Pieces, Carbide, Bright
Hougen® Copperhead™ 18002 Annular Cutter Kit, 9/16 in Dia Min Cutter, 1-1/16 in Dia Max Cutter, 2 in D Cutting, 9 Pieces, Carbide, Bright
Browning®Type B minimum bore sprockets are offered in single, double and triple strands. Offerings include 25 to 200 pitch range. Minimum bore sprockets are available in bore ranges from 1/4 to 8-3/8 in.
