H-3517X5/8 17 Tooth Sprockets For #35
17 TOOTH SPROCKETS FOR #35 CHAIN-BRWH3517X5/8 >
Recently Viewed
17 TOOTH SPROCKETS FOR #35 CHAIN-BRWH3517X5/8 >
48X96X1/4" LEXAN/POLYCARBONATE BRAND SHEET-CPI4X8X1/4LEXAN/POLYCARBONATE >
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
GEARWRENCH® 81667 Long Length Open End Combination Wrench, 10 mm Wrench, 12 Points, 15 deg Offset, 166 mm OAL, Premium Alloy Steel, Polished Chrome
The GEARWRENCH combination wrenches are durable tools for most jobs. They are made from alloy steel with either a full polish or satin finish that resists rust & corrosion. The off-corner loading design on both ends provides a stronger grip on fasteners, reduces fastener rounding, and delivers up to 25% more torque to the fasteners. Sizes are stamped on the beam for quick, easy, & permanent identification. The box end is offset 15° for increased access to fasteners. Available in stubby & long pattern lengths and 6 & 12 point, the GEARWRENCH combination wrenches are a must have for every toolbox.
8-PIECE (STANDARD, PHILLIPS) SCREWDRIVER SET-ARS66612 >
16 TOOTH SPROCKETS FOR #40 CHAIN-BRWH4016X5/8 >
