19-TOOTH #50 CHAIN SPROCKETS IDC 50-B-19-F-3/4
19 TOOTH SPROCKETS FOR #50 CHAIN
Recently Viewed
19-TOOTH #50 CHAIN SPROCKETS IDC 50-B-19-F-3/4
19 TOOTH SPROCKETS FOR #50 CHAIN
MORSE® 57940 5943 Center Cutting Regular Length Single End End Mill, 5/8 in Dia Cutter, 1-1/4 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL, Bright
MORSE® 58178 5955 Center Cutting Long Length Single End End Mill, 3/4 in Dia Cutter, 2-1/4 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 5 in OAL, Bright
Browning® 1045996 VP Series Type 5 Variable Pitch Sheave, 1-1/8 in Finished Bore, 5.35 in OD, 2 Grooves, 3.9 to 4.7 in (3L)/4.2 to 5.2 in (A/4L)/4.4 to 5.4 in (B/5L) Dia Pitch, 1-3/8 to 2-1/8 in W Face
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.
MasterDrive 3535-2.7/16 3535 3 Socket Tapered Bushing, 2.43 in Dia Bore, 4.83 in Dia Barrel, 5 in OAL, Cast Iron
TB (Taped Lock Style) Bushings are used on sheaves, sprockets and pulleys to provide increased clamping force over standard bore-to-size components. They are tapered in design without flanges and utilize screws to tighten on the shaft. Their compact design makes them convienent in many applications that are space-constrained. Each TB Bushing size is produced in a number of different finished bore options that include a keyway, as well as a minimum plain bore option. This allows users flexibility when using TB style sheaves, sprockets or pulleys in applications that may utilize various shaft sizes.
17-TOOTH #60-1 CHAIN SPROCKETS IDC 60-B-17-F1-7/16
17 TOOTH SPROCKETS FOR #60 CHAIN
