25-TOOTH #40-1 CHAIN SPROCKETS IDC 40-B-25-F-3/4
25 TOOTH SPROCKETS FOR #40 CHAIN
Recently Viewed
25-TOOTH #40-1 CHAIN SPROCKETS IDC 40-B-25-F-3/4
25 TOOTH SPROCKETS FOR #40 CHAIN
18-TOOTH #35-1 CHAIN SPROCKETS IDC 35-B-18-F-3/4
18 TOOTH SPROCKETS FOR #35 CHAIN
BBI 221172 Shoulder Screw, Round Socket Head, ASTM A574 Alloy Steel, 5/8 in Dia x 2-1/4 in L Shoulder, 1/2-13
BBI 221172 Shoulder Screw, Round Socket Head, ASTM A574 Alloy Steel, 5/8 in Dia x 2-1/4 in L Shoulder, 1/2-13
4" LIGHTWEIGHT DRY POWDER HOSE(FT)-RBHT760AA400 >
The Crescent Nicholson half-round double-cut bastard files are ideal for materials containing iron, mild steel, plastics, and wood. The coarse grade is perfect for use on concave, convex, and flat surfaces. The two-sided files are rounded on 1 side and flat on the other, so you can round out holes with ease. Half-round bastard files are double-cut on the rounded sides, allowing you to quickly remove material from the work piece.
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
