P-40-14-M-40-SF 40 Tooth 14-mm-pitch Timing
40 TOOTH 14-MM-PITCH TIMING BELT SHEAVES-IDCP4014M40SF >
Recently Viewed
40 TOOTH 14-MM-PITCH TIMING BELT SHEAVES-IDCP4014M40SF >
Anvil® 0310086806 FIG 1125 Auxiliary Air Regulator Reducer, Coupling, 1 x 3/4 in Nominal, FNPT End Style, 150 lb, Malleable Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
Dodge® Tigear-2® 17Q05L56 Standard Right Angle Worm Gear Speed Reducer, Quill Input, Solid A Shaft Output, 2.59 hp, 5:1 Gear, 350 rpm Maximum Output, 430 in-lb Torque Rating
The speed reducer shall be a single reduction worm gear reducer incorporating three input configurations - a quill style for direct attachment of electric motors, a separate keyed input shaft suitable for flexible coupling to a footed motor or belt and pulley input configuration and a motor adapter style input that employs a three piece coupling to connect electric motors to the reducer. These input configurations shall be available in both solid and hollow output shaft designs. The reducer shall be manufactured in the United States of America.
Alemite® 1627-B Straight Thread Fitting, 1/4 in PTF Thread, 7/8 in OAL, 27/64 in L Shank, Trivalent Zinc Plated
Alemite® 1627-B Straight Thread Fitting, 1/4 in PTF Thread, 7/8 in OAL, 27/64 in L Shank, Trivalent Zinc Plated
Dremel® T118G Basic Jig Saw Blade, 3-5/8 in L x 0.3 in W, 36 TPI, HSS Cutting Edge, HSS Body
Basic for Metal blades are the economical choice for cutting sheet metal and thin metals (ferrous and non-ferrous). Ideal for straight-line and fast cuts. T-shank design for maximum grip and stability which fits 90% of all current jigsaw makes and models.
TCM12161SM>
