P-18-H-200 18 Tooth H-pitch Timing
18 TOOTH H-PITCH TIMING BELT SHEAVES-IDCP18H200 >
Recently Viewed
18 TOOTH H-PITCH TIMING BELT SHEAVES-IDCP18H200 >
Littelfuse® POWR-GARD® 312005P Type 3AG Fast Acting Cartridge Fuse, 5 A, 250 V AC, 10 kA Interrupt, Cartridge Body
The 3AG fast acting fuse solves a broad range of application requirements while offering reliable performance and cost-effective circuit protection.
3/4" -ID NU-LOC INSERT BEARING-FYHNC20412 >
Gates® Power Transmission PowerGrip® GT®2 Twin Power® TP1760-8MGT-30 9232 Synchronous Belt, 220 Teeth, 8 mm Pitch, 1760 mm OAL, 30 mm W, Neoprene
PowerGrip™ GT™2 Twin Power™ Belts feature dual-sided teeth to provide equal load carrying capacity on either belt surface, enabling synchronization from both driving surfaces. These synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates Twin Power PowerGrip GT2 belts are designed to perform at high speeds and characterized by low-running noise, with a larger tooth profile for increased performance capacity.
Leviton® wire mesh safety grips are built tough to provide the strength, reliability and gripping force required for today's demanding wire management applications. They are designed to distribute stress over a large area so they can securely hold, pull or support the wire, rope, tubing or fiber optic cable to which they are applied. Leviton® wire mesh safety grips are flexible holding devices used to pull cable, rope or tubing into place, to support it after it has been installed, to prevent cable pullout or to provide strain relief that reduces the arc of bend at points of wire connections or terminations. Available in a wide selection of style, weave, attachment and wire options designed to meet the highest standards for strength, flexibility, durability and longevity.
The Zip-It anchor is a one-piece self drilling anchor designed for use in hollow gypsum wallboard for light to medium duty loads. It is available in both engineered nylon and Zamac alloy for use with No. 8 screws in 3/8" to 1" thick wallboard. The Zip-It Jr. is also available in engineered nylon and Zamac alloy for use with No. 6 screws in 3/8" to 5/8" wallboard.
