P-16-H-300 16 Tooth H-pitch 3/4" Minimum Plain Bore Timing
16 TOOTH H-PITCH 3/4" MINIMUM PLAIN BORE TIMING BELT SHEAVES-IDCP16H300 >
Recently Viewed
16 TOOTH H-PITCH 3/4" MINIMUM PLAIN BORE TIMING BELT SHEAVES-IDCP16H300 >
Gates® Power Transmission MegaCrimp™ 16G-16FJX90M G25 Medium Bent Tube Hydraulic Coupling, 1 in x 1-5/16-12 Nominal, Hose x 37 deg Female JIC Flare Swivel, Steel
It’s what’s inside the MegaCrimp coupling that makes it perform so well, the “C” insert. This “C” insert allows usage with different hose constructions and wall thicknesses. In addition, the C-insert ensures an even distribution of crimping forces to form a concentric seal. That simplifies your inventory requirements since one size can accommodate many different hose ODs, on both one- and two-wire braid hoses and select Xpiral hoses. An additional bonus: MegaCrimp couplings are fully qualified for SAE, EN, and ISO performance.
Leviton® wire mesh safety grips are built tough to provide the strength, reliability and gripping force required for today's demanding wire management applications. They are designed to distribute stress over a large area so they can securely hold, pull or support the wire, rope, tubing or fiber optic cable to which they are applied. Leviton® wire mesh safety grips are flexible holding devices used to pull cable, rope or tubing into place, to support it after it has been installed, to prevent cable pullout or to provide strain relief that reduces the arc of bend at points of wire connections or terminations. Available in a wide selection of style, weave, attachment and wire options designed to meet the highest standards for strength, flexibility, durability and longevity.
Gates® Power Transmission Hi-Power® II A124 Banded Heavy Duty V-Belt, A Section, 1/2 in W Top, 126 in L Outside, 5/16 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
7/8" X 5-1/2" LIFT ARM PIN-HIG00200 >
Channellock® 526 Slip Joint Plier, 0.96 in L x 1.28 in W x 0.43 in THK Forged Alloy Steel Jaw, Serrated Jaw Surface, 6-1/2 in OAL, ASME B107.23M
No tool box is complete without Channellock® slip joint pliers. They're versatile, easy-to use and come with legendary strength and reliability.
