17-L-F-100X3/4 17 Tooth L-pitch Timing
17 TOOTH L-PITCH TIMING BELT SHEAVES-BRW17LF100X3/4 >
Recently Viewed
17 TOOTH L-PITCH TIMING BELT SHEAVES-BRW17LF100X3/4 >
Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
Heritage™ BP-216 Imperial Bridge Pin, 0.125 in Dia x 1-15/16 in L, Fits Shaft 1/2 to 3/4 in, MB Spring Wire, Zinc Clear
Heritage™ BP-216 Imperial Bridge Pin, 0.125 in Dia x 1-15/16 in L, Fits Shaft 1/2 to 3/4 in, MB Spring Wire, Zinc Clear
BBI 502114 Full Thread Tap Bolt, 5/16-18, 5 in L Under Head, 5 Grade, Medium Carbon Steel, Zinc CR+3
BBI 502114 Full Thread Tap Bolt, 5/16-18, 5 in L Under Head, 5 Grade, Medium Carbon Steel, Zinc CR+3
3/16" X 3/4" WOODRUFF KEY-MED1010 >
Coilhose® PT1017-50B Polyurethane Tubing, 6.5 mm ID x 10 mm OD x 50 ft L x 1.75 mm THK Wall, 95A Polyurethane, Domestic
Coilhose® PT1017-50B Polyurethane Tubing, 6.5 mm ID x 10 mm OD x 50 ft L x 1.75 mm THK Wall, 95A Polyurethane, Domestic
