FHP BELT SHEAVES
6.17" X 3/4" FINISHED BORE SINGLE GROOVE SHEAVE FOR 3-L BELT-BRWOK60X3/4 >
6.17" X 1" FINISHED BORE SINGLE GROOVE SHEAVE FOR 3-L BELT-BRWOK60X1 >
5.17" X 5/8" FINISHED BORE SINGLE GROOVE SHEAVE FOR 3-L BELT-BRWOK50X5/8 >
2.40" X 3/4" FINISHED BORE SINGLE GROOVE SHEAVE FOR 3-L BELT-BRWOK22X3/4 >
1.92X1/2" FINISHED BORE SINGLE GROOVE SHEAVE FOR 3-L BELT-BRWOK17X3/4 >
1.92X1/2" FINISHED BORE SINGLE GROOVE SHEAVE FOR 3-L BELT-BRWOK17X1/2 >
3.36" -OD BAR STEEL SHEAVES-BRWBS32X7/8 >
11.93 -OD PRESSED STEEL SHEAVES-BRWBS120X3/4 >
10.93 -OD PRESSED STEEL SHEAVES-BRWBS110X3/4 >
SINGLE GROOVE 8" X 7.75" A-BELT ALUMINUM SHEAVE WITH 1/2" - ID-BRWAZ80X1/2 >
SINGLE GROOVE 5" X 4.75" A-BELT ALUMINUM SHEAVE WITH 1" - ID-BRWAZ60X1 >
SHEAVE-BRWAZ60X5/8>
SINGLE GROOVE 5" X 4.75" A-BELT ALUMINUM SHEAVE WITH 3/4" - ID-BRWAZ50X3/4 >
SINGLE GROOVE 4.5" X 4.25" A-BELT ALUMINUM SHEAVE WITH 5/8" - ID-BRWAZ45X5/8 >
SINGLE GROOVE 4.5" X 4.25" A-BELT ALUMINUM SHEAVE WITH 3/4" - ID-BRWAZ45X3/4 >
SINGLE GROOVE 4.5" X 4.25" A-BELT ALUMINUM SHEAVE WITH 1/2" - ID-BRWAZ45X1/2 >
SINGLE GROOVE 3.5" X 3.25" A-BELT ALUMINUM SHEAVE WITH 1/2" - ID-BRWAZ35X1/2 >
AZ-32X5/8 Single Groove 3.25" X 3" A-belt Aluminum Sheave With 5/8"
SINGLE GROOVE 3.25" X 3" A-BELT ALUMINUM SHEAVE WITH 5/8"
AZ-30X5/8 Single Groove 3" X 2.75" A-belt Aluminum Sheave With 5/8"
Browning 5/8" Bore Diam, 3.05" OD, Finished Bore Single Groove Sheave 21/32" Wide, Cast Iron
SINGLE GROOVE 3" X 2.75" A-BELT ALUMINUM SHEAVE WITH 3/4" - ID-BRWAZ30X3/4 >
AZ-30X1/2 Single Groove 3" X 2.75" A-belt Aluminum Sheave With 1/2"
SINGLE GROOVE 3" X 2.75" A-BELT ALUMINUM SHEAVE WITH 1/2" - ID-BRWAZ30X1/2 >
SINGLE GROOVE 2.5" X 2.25" A-BELT ALUMINUM SHEAVE WITH 3/4" - ID-BRWAZ25X3/4 >
SINGLE GROOVE 2.5" X 2.25" A-BELT ALUMINUM SHEAVE WITH 1/2" - ID-BRWAZ25X1/2 >
SINGLE GROOVE 2" X 1.75" A-BELT ALUMINUM SHEAVE WITH 5/8" - ID-BRWAZ20X5/8 >
Recently Viewed
40000-BTU PROPANE CYLINDER HEATERS-REDSPC40>
BROACH BUSHING-DUM33354>
PIX BB-112 IS A DOUBLE-SIDED V-BELT, 116.6 OUTSIDE LENGTH, 21/32" TOP WIDTH, 17/32" THICKNESS 1 RIB
HEXAGONAL OR DOUBLE V BELTS ARE RECOMMENDED FOR SERPENTINE DRIVES, WHERE POWER IS TO BE TRANSMITTED FROM BOTH THE SIDES OF THE BELT. DOUBLE V BELTS ARE DESIGNED WITH SPECIAL TENSION CORD FOR MEETING DUAL POWER REQUIREMENT ALONG WITH MULTIPLE BENDS. THEY PROVIDE AMAZING TORQUE, STRENGTH, DURABILITY AND ARE USED ON DRIVES WITH MORE REVERSE BENDS.
-PIXBB112 >
PIX B70 IS A CLASSICAL V-BELT, 73" OUTSIDE LENGTH, 5/8" TOP WIDTH, 13/32" THICKNESS, 1 RIB
PRECISE FIT, DURABLE POLYESTER CONSTRUCTION, VERSATILE APPLICATIONS, RESISTANT TO WEAR AND STRETCH, IMPROVES EQUIPMENT EFFICIENCY.
-PIXBB70 >
4" -ID 4-BOLT FLANGE UNIT-BRWSFC1000EX4 >
V-BELT-BRWA96>
