A-B-C-D-E SHEAVES
1-GROOVE A OR B-BELT H-BUSHING SHEAVE - IDCBK067H>
BK-070-3/4 1-groove A Or B-belt 3/4"-ID Sheave
1-GROOVE A OR B-BELT 3/4"-ID SHEAVE - IDCBK0703/4>
1-GROOVE A OR B-BELT H-BUSHING SHEAVE - IDCBK070H >
BK-072-3/4 1-groove A Or B-belt 3/4"-ID Sheave
1-GROOVE A OR B-BELT 3/4"-ID SHEAVE - IDCBK0723/4>
1-GROOVE A OR B-BELT H-BUSHING SHEAVE - IDCBK075H>
SINGLE GROOVE A OR B-BELT H-BUSH SHEAVES-IDCBK085H >
SINGLE GROOVE A OR B-BELT 1" -ID SHEAVES-IDCBK1001 >
SINGLE GROOVE A OR B-BELT H-BUSH SHEAVES-IDCBK100H >
SINGLE GROOVE A OR B-BELT CAST IRON H-BUSHING SHEAVES-BRWBK100X11/4 >
SINGLE GROOVE A OR B-BELT H-BUSH SHEAVES-IDCBK105H >
SINGLE GROOVE A OR B-BELT CAST IRON H-BUSHING SHEAVES-BRWBK110H >
SINGLE GROOVE A OR B-BELT CAST IRON H-BUSHING SHEAVES-BRWBK115H >
SINGLE GROOVE A OR B-BELT CAST IRON H-BUSHING SHEAVES-BRWBK120H >
SINGLE GROOVE A OR B-BELT H-BUSH SHEAVES-IDCBK130H >
SINGLE GROOVE A OR B-BELT CAST IRON H-BUSHING SHEAVES-BRWBK140H >
SINGLE GROOVE A OR B-BELT CAST IRON H-BUSHING SHEAVES-BRWBK160X1 >
SINGLE GROOVE 1/2" -ID A OR B-BELT SHEAVES-BRWBK24X1/2 >
SINGLE GROOVE 3/4" -ID A OR B-BELT SHEAVES-BRWBK24X3/4 >
SINGLE GROOVE 5/8" -ID A OR B-BELT SHEAVES-BRWBK24X5/8 >
SINGLE GROOVE 1/2" -ID A OR B-BELT SHEAVES-BRWBK25X1/2 >
SINGLE GROOVE 3/4" -ID A OR B-BELT SHEAVES-BRWBK25X3/4 >
SINGLE GROOVE 5/8" -ID A OR B-BELT SHEAVES-BRWBK25X5/8 >
SINGLE GROOVE 7/8" -ID A OR B-BELT SHEAVES-BRWBK25X7/8 >
SINGLE GROOVE 1/2" -ID A OR B-BELT SHEAVES-BRWBK26X1/2 >
Recently Viewed
Browning® 767820 VF2E 200 Normal Duty Non-Expansion Flange Mount Ball Bearing Unit, 3/4 in Dia Bore, 3-17/32 in L Bolt Center-to-Center, 2-Bolt Flange Mount, 2-1/2 in OAL/Dia
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
Gates® Power Transmission Super HC® 5V750 Banded Heavy Duty V-Belt, 5V Section, 5/8 in W Top, 75 in L Outside, 35/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
.394" X .787" X .276" OIL SEALS-TCM10X20X7TC >
Sealmaster® 701233 FB Series Non-Expansion Round Straight Standard-Duty Flange Mount Ball Bearing Unit, 3/4 in Dia Bore, 2-3/8 in L Bolt Center-to-Center, 3-Bolt Flange Mount, 1-1/2 in OAL/Dia
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
WATTS® 0372271 530 Calibrated Pressure Relief Valve, 3/4 in Nominal, MNPT x FNPT End Style, 300 psi Pressure, Brass Body
This 3/4 inch calibrated pressure relief valve is used in commercial, residential and industrial applications to protect against excessive pressure in systems containing water, oil, or air. It consists of a bronze body construction with 3/4 inch NPT threaded male inlet and 1/2 inch NPT threaded female (drain) outlet connections, stainless steel spring, brass bonnet, Buna-N disc, and Buna-N O-ring. Series 530C has a calibrated adjustment feature for setting the valve to the required relief pressure, and is ideal for bypass thermal expansion pressure relief (not ASME approved). It is for use in fire protection systems. The maximum pressure is300 psi (20.67 bar). The adjustable pressure range is 50 to 175 psi (3.45 to 12.06 bar).
The McGill® CAMROL® full complement needle bearings feature black oxide treated bearing steel. They are available in two basic mounting styles for use in mechanical automation or linear motion applications. Our basic features each contribute to superior performance. The LUBRIDISC® seal option helps prevent metal to metal contact within the bearing. It also provides a barrier for containment entry and blowout protection when relubricating. These bearings are available with several dimensional choices. The seal options and combinations provide a specific solution for each application. Within the following section you can learn more about these features and how they can be applied to your application.
