BK-067-H 1-groove A Or B-belt H-bushing Sheave
1-GROOVE A OR B-BELT H-BUSHING SHEAVE - IDCBK067H>
Recently Viewed
1-GROOVE A OR B-BELT H-BUSHING SHEAVE - IDCBK067H>
BBI 532206 Partially Threaded Round Socket Cap Screw, M12x1.75, 55 mm OAL, Alloy Steel, 12.9 Grade
BBI 532206 Partially Threaded Round Socket Cap Screw, M12x1.75, 55 mm OAL, Alloy Steel, 12.9 Grade
BBI 581659 1960 Semi-Standard Round Socket Cap Screw, 5/8-11, 9 in OAL, Alloy Steel, 3A Grade
BBI 581659 1960 Semi-Standard Round Socket Cap Screw, 5/8-11, 9 in OAL, Alloy Steel, 3A Grade
BBI 532934 Partially Threaded Round Socket Cap Screw, M3x0.5, 50 mm OAL, Alloy Steel, 12.9 Grade
BBI 532934 Partially Threaded Round Socket Cap Screw, M3x0.5, 50 mm OAL, Alloy Steel, 12.9 Grade
Koyo B-2020 Inch Series Open Ends Round Bore Uncaged Drawn Cup Needle Roller Bearing, 1-1/4 in Dia Bore, 1-1/2 in OD, 1 Row, 1-1/4 in W, 10540 lb Dynamic/27200 lb Static Load
Drawn Cup Needle Roller Bearings supports radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearing are easily installed with a press fit in the housing.
Koyo HJ-486028 Inch Series Caged Heavy Duty Needle Roller Bearing, 3 in Dia Bore, 3-3/4 in OD, 1-3/4 in W, 27900 lbf Dynamic/61400 lbf Static Load
Heavy duty needle roller bearings consists of a machined and ground channel-shaped outer ring with a complement of needle rollers and a cage. The high-strength cage retains and guides the rollers. An optional lubrication groove and hole in the outer ring facilitates re-lubrication. These bearings can be used with or without machined and ground inner ring, depending on the suitability of the shaft as a raceway surface.
