A-B-C-D-E SHEAVES
SINGLE GROOVE 3.05" X 2.80" X 2.48 A-BELT FOR USE WITH H-BUSHING SHEAVES-BRWAK30H >
SINGLE GROOVE 5/8" -IS A-BELT SHEAVES-BRWAK28X5/8 >
SINGLE GROOVE 3/4" -ID A-BELT SHEAVES-BRWAK28X3/4 >
SINGLE GROOVE 1/2" -ID A-BELT SHEAVES-BRWAK28X1/2 >
SINGLE GROOVE 5/8" -ID A-BELT SHEAVES-BRWAK27X5/8 >
SINGLE GROOVE 3/4" -ID A-BELT SHEAVES-BRWAK27X3/4 >
SINGLE GROOVE 1/2" -ID A-BELT SHEAVES-BRWAK27X1/2 >
SINGLE GROOVE 5/8" -ID A-BELT SHEAVES-BRWAK26X5/8 >
SINGLE GROOVE 3/4" -ID A-BELT SHEAVES-BRWAK26X3/4 >
SINGLE GROOVE 1/2" -ID A-BELT SHEAVES-BRWAK26X1/2 >
SINGLE GROOVE 5/8" -ID A-BELT SHEAVES-BRWAK25X5/8 >
SINGLE GROOVE 3/4" -ID A-BELT SHEAVES-BRWAK25X3/4 >
SINGLE GROOVE 1/2" -ID A-BELT SHEAVES-BRWAK25X1/2 >
SINGLE GROOVE 5/8" -ID A-BELT SHEAVES-BRWAK23X5/8 >
SINGLE GROOVE 3/4" -ID A-BELT SHEAVES-BRWAK23X3/4 >
SINGLE GROOVE 1/2" -ID A-BELT SHEAVES-BRWAK23X1/2 >
SINGLE GROOVE 5/8" -ID A-BELT SHEAVES-BRWAK22X5/8 >
SINGLE GROOVE 3/4" -ID A-BELT SHEAVES-BRWAK22X3/4 >
SINGLE GROOVE 1/2" -ID A-BELT SHEAVES-BRWAK22X1/2 >
SINGLE GROOVE5/8" -ID A-BELT SHEAVES-BRWAK20X5/8 >
SINGLE GROOVE 3/4" -ID A-BELT SHEAVES-BRWAK20X3/4 >
SINGLE GROOVE 1/2" -ID A-BELT SHEAVES-BRWAK20X1/2 >
SINGLE GROOVE 5/8" -ID A-BELT SHEAVES-BRWAK17X5/8 >
SINGLE GROOVE 1/2" -ID A-BELT SHEAVES-BRWAK17X1/2 >
Recently Viewed
45 TOOTH DOUBLE SPROCKETS FOR #60 CHAIN-BRWD60R45 >
PIX AA-51 IS A 51" PITCH LENGTH, 13MM WIDTH, 8MM THICK , JLS STANDARD A-SECTION RUBBER DRIVE TRANSMISSION BELT.
DESIGNED FOR SERPENTINE DRIVES WITH ONE OR MORE REVERSE BENDS WHICH REQUIRE POWER TRANSMITTED FROM BOTH SIDES. IDEALLY SUITED TO HANDLE TOUGH APPLICATIONS SUCH AS AGRICULTURAL, TEXTILE, AND PRINTING MACHINERY. HIGH STRENGTH POLYESTER TENSILE CORDS. DESIGNED FOR LOW HEAT BUILD UP TO EXTEND BELT LIFE.
-PIXAA51 >
1-1/16" 2-PIECE CLAMP SHAFT COLLAR-AMCASP1062S >
1/2" ARBOR ASSEMBLY-HOU14007C >
38 TOOTH 8-MM-PITCH TIMING BELT SHEAVES-BRWB388M20SH >
2-1/2" SOLID SHAFT COLLAR
