BK-27X1/2 Single Groove 1/2" -ID A Or B-belt
SINGLE GROOVE 1/2" -ID A OR B-BELT SHEAVES-BRWBK27X1/2 >
Recently Viewed
SINGLE GROOVE 1/2" -ID A OR B-BELT SHEAVES-BRWBK27X1/2 >
115-VOLT 20-GPM TRANSFER PUMPS-TUTFR700>
5/16" X 6" #3 PHILLIPS SCREWDRIVER
Carlon® UA7AGB SCH 40 Bell End Standard Radius Conduit Elbow, 1-1/4 in Trade, 45 deg, PVC
Carlon® products set the standard for non-metallic indoor and outdoor boxes, conduit bodies and fittings, enclosures and more. These premium products continue to supply the industry with innovative ideas, easier upgrades and a long, service-free product life.
Browning® 1296474 T45L Automatic Torque Limiter, 1-3/8 in Finished Bore, 4-1/2 in OD, 2800 in-lb (1-Spring)/4900 in-lb (2-Spring) Torque
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
KEY CABINETS-JWH1200KC>
