6/5-V-0630-SK 6-grv 5-v-belt Quick Disconnect Sk-bush
6-GRV 5-V-BELT QUICK DISCONNECT SK-BUSH SHEAVES-IDC6/5V0630SK >
Recently Viewed
6-GRV 5-V-BELT QUICK DISCONNECT SK-BUSH SHEAVES-IDC6/5V0630SK >
Assortment of 6 in W x 12 in L sheets contains 1 each of the following thicknesses: 0.001 in, 0.0015 in, 0.002 in, 0.003 in, 0.004 in, 0.005 in, 0.006 in, 0.007 in, 0.008 in, 0.01 in, 0.012 in and 0.015 in. Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance, mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
5/8" DIAMETERX5" SHOULDER BOLT-HOL08124 >
Morse® Advanced Edge Power® 392082 Heavy Duty Reciprocating Saw Blade, 9 in L x 1 in W, 14, Bi-Metal Body
Morse RBWP94214T05 (392082), 9" x 14TPI, bimetal reciprocating saw blade is designed for cutting metal, from 1/8", up to 3/8", thickness. Wider, thicker blade body reduces blade deflection, increases rigidity, under heavier feed pressure. Five (5) blades per pack.
6-GRV 3-V-BELT QUICK DISCONNECT SK-BUSH SHEAVES-IDC6/3V0600SK >
Single-row deep groove ball bearings are the most common bearing type in the world due to their versatility and performance. These bearings are available in a variety of seal, shield and snap-ring arrangements. Bearings with seals or shields are standardized and already contain the proper amount of grease. Open bearings will require lubrication. These bearings can sustain radial and/or axial loads and because of their simple design, this bearing type can be produced to provide both high-running accuracy and high-speed operation.
