23742 CHICAGO RAWHIDE 2.375" X 3.371" X .438" OIL SEALS
Part Number: 23742 (also labeled as 23742-CR or SKF 23742)Inside Diameter (Shaft Size): 2.375 inches (2-3/8")Outside Diameter (Bore Size): 3.371 inches (some specs list up to 3.376")Width: 0.438 inches (7/16")Design Type: CRWH1 (Features a double steel case, carbon steel garter spring, and a specialized SKF WAVE lip)Material: Nitrile Rubber (NBR) lipTemperature Range: -40°F to 212°F (-40°C to 100°C)Outer Coating: Bore Tite Coating (a green sealant coating that helps fill minor imperfections in the housing bore)
Recently Viewed
Part Number: 23742 (also labeled as 23742-CR or SKF 23742)Inside Diameter (Shaft Size): 2.375 inches (2-3/8")Outside Diameter (Bore Size): 3.371 inches (some specs list up to 3.376")Width: 0.438 inches (7/16")Design Type: CRWH1 (Features a double steel case, carbon steel garter spring, and a specialized SKF WAVE lip)Material: Nitrile Rubber (NBR) lipTemperature Range: -40°F to 212°F (-40°C to 100°C)Outer Coating: Bore Tite Coating (a green sealant coating that helps fill minor imperfections in the housing bore)
18" DUST MOP FRAME - MAG5118F >
Milwaukee® M18™ FUEL™ 2724-20 Cordless Handheld Blower, 450 cfm Air Flow, 120 mph Air Velocity, 18 VDC 9 Ah Li-Ion Battery
The M18 FUEL™ blower has the power to clear from 15 ft, gets to full throttle in under 1 second, and is up to 4 lbs lighter than competitors. Designed to meet landscape maintenance professional needs, the POWERSTATE™ brushless motor and REDLITHIUM™ HIGH DEMAND™ 9.0 battery (sold separately) deliver 450 CFM and 120 mph output. The blower features a variable speed trigger and high/low speed settings for increased control. The high setting is for the most demanding applications and low is optimized for clearing debris from flower beds without moving mulch. The lock on button allows the blower to be locked on to full throttle, so the operating hand can be relaxed reducing fatigue. The M18 FUEL™ blower is fully compatible with 150+ solutions on the M18™ system.
Carlon® E995J Meter Offset, 2 in, For Use With SCH 40 and SCH 80 Rigid Conduit, PVC
Carlon® products set the standard for non-metallic indoor and outdoor boxes, conduit bodies and fittings, enclosures and more. These premium products continue to supply the industry with innovative ideas, easier upgrades and a long, service free product life.
Sealmaster® 703378 SEHB Non-Expansion Standard-Duty Hanger Ball Bearing Unit, 1 in Dia Bore, 3-1/8 in OD, 1-1/2 in W, Cast Iron Bearing, Set Screw Collar Locking
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing and lubrication options or industry specific solutions.
LADIE'S BROWN JERSEY GLOVES-GREWA7538A >
