SPB1000NEX33/16 3-3/16" -ID 2-bolt Pillow
3-3/16" -ID 2-BOLT PILLOW BLOCK-BRWSPB1000NEX33/16 >
Recently Viewed
3-3/16" -ID 2-BOLT PILLOW BLOCK-BRWSPB1000NEX33/16 >
Weiler® 17682 Wheel Brush, 3-1/4 in Dia Brush, 3/8 in W Face, 0.02 in Dia Standard/Twist Knot Filament/Wire
Weiler® 17682 Wheel Brush, 3-1/4 in Dia Brush, 3/8 in W Face, 0.02 in Dia Standard/Twist Knot Filament/Wire
Campbell® 6423000 GX Series Plate Clamp, 0.5 ton Load, 1/16 to 5/8 in Jaw Opening, 4 in OAW, Forged Steel, Load Activated Locking
Campbell® can trace its beginnings back to 1834, when one of the many companies that eventually became what is today the Campbell® brand began manufacturing harnesses for horses. Over the years, countless products were added, including wire rope and chain fittings, drop forged chain hardware, high quality tackle blocks, shackles, hooks and much more.
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
Browning® 1073808 Type F Q-D® Bushing, 2 in Dia Bore, 4-3/8 in Dia Barrel, 6-5/8 in Dia Flange, 3.68 in OAL, Steel
Browning® 1073808 Type F Q-D® Bushing, 2 in Dia Bore, 4-3/8 in Dia Barrel, 6-5/8 in Dia Flange, 3.68 in OAL, Steel
Enerpac® RACH202 Hollow Plunger Single Acting Spring Return Hydraulic Cylinder, 25.4 ton Capacity, 2.95 in Bore, 1.97 in L Stroke, 7.41 in Retract, 2.17 in Dia Rod, 10000 psi Pressure
Enerpac® RACH202 Hollow Plunger Single Acting Spring Return Hydraulic Cylinder, 25.4 ton Capacity, 2.95 in Bore, 1.97 in L Stroke, 7.41 in Retract, 2.17 in Dia Rod, 10000 psi Pressure
