LWM-4-4 Motor Controller
MOTOR CONTROLLER PARTS-BRWLWM44 >
Recently Viewed
MOTOR CONTROLLER PARTS-BRWLWM44 >
V-BELT - JAS8V1500>
Browning® 1045392 VP Series Type 2 Variable Pitch Sheave, 1-1/8 in Finished Bore, 4.15 in OD, 1 Groove, 2.7 to 3.5 in (3L)/3 to 4 in (A/4L)/3.2 to 4.2 in (B/5L) Dia Pitch, 3/4 to 1-1/8 in W Face
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.
2" -ID HIGH PILLOW BLOCK UNIT-MBUVPS232S >
Thomson 1" LINEAR BEARING PILLOW BLOCKS THP SPB-16-OPN
The Super Ball Bushing® bearing has been the industry standard for self-aligning linear bearings for over twenty years. This bearing provides three times the load capacity or 27 times the travel life of conventional linear bearings. Besides the dramatic increase in load capacity, the Super Ball Bushing® bearing is self-aligning, lightweight and adjustable with a low coefficient of friction. It is a quick and easy replacement for high friction plain bearings. The wear-resistant, engineered-polymer retainers and outer sleeves reduce inertia and noise in critical, high speed applications.
APACHE 98108485 Hose Assembly With Static Wire, 1 in Nominal, MPT x MPT Crimped End Style, 14 ft L, 60 psi Working, Nitrile Rubber
APACHE 98108485 Hose Assembly With Static Wire, 1 in Nominal, MPT x MPT Crimped End Style, 14 ft L, 60 psi Working, Nitrile Rubber
