15-S-18 Stainless Steel
STAINLESS STEEL BELT LACING-COV15S18 >
Recently Viewed
STAINLESS STEEL BELT LACING-COV15S18 >
Krylon® K01401777 Metallic Spray, 16 oz Container, Bright Silver, 25 sq-ft Coverage, 15 min Curing
FYH® SAA206 20FP7 SAA Cylindrical Ball Bearing Insert, 1-1/8 in Dia Bore, 2.44 in OD, 1.4 in W, 19.5 kN Dynamic/11.3 kN Static Load
FYH® SAA206 20FP7 SAA Cylindrical Ball Bearing Insert, 1-1/8 in Dia Bore, 2.44 in OD, 1.4 in W, 19.5 kN Dynamic/11.3 kN Static Load
IDEAL FOR USE IN SECURITY SYSTEMS, COMMUNICATIONS, INTERCOM OR PA SYSTEMS, AND SOUND OR AUDIO APPLICATIONS. PVC INSULATION,
L-JWH549150 >
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
REMOTE HYDRAULIC FILTER BASE 1-12 - WIX24768>
