2525X2-7/16 2-7/16" -ID Taper-lock
2-7/16" -ID TAPER-LOCK BUSHING-BRW2525X27/16 >
Recently Viewed
2-7/16" -ID TAPER-LOCK BUSHING-BRW2525X27/16 >
Apex® M-13MM13 Magnetic Socket, Short Style, 3/8 in Square Drive, 13 mm 6-Point/Hex Socket, 6 Points
Apex® M-13MM13 Magnetic Socket, Short Style, 3/8 in Square Drive, 13 mm 6-Point/Hex Socket, 6 Points
Browning® 1073923 Type F Q-D® Bushing, 2-3/4 in Dia Bore, 4-3/8 in Dia Barrel, 6-5/8 in Dia Flange, 3.68 in OAL, Cast Iron
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
PIX AX-32 IS A COGGED, CLASSICAL V-BELT, 34" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS 1 RIB
A COGGED VERSION OF THE STANDARD "A" BELT. THE COGGED VERSION ALLOW THE USE OF A SMALLER DIAMETER PULLEY. ENHANCED HEAT AND OIL RESISTANCE, SUPERIOR FLEXIBILITY AND STRENGTH, ANTI-STATIC DESIGN FOR SAFETY, DURABLE FABRIC COVER LAYER, CUSHION RUBBER MATRIX FOR RELIABILITY.
-PIXAX32 >
Eklind® 54950 Hex Key, Hex Drive, Cushion T-Handle Handle, ANSI B18.3, Alloy Steel, Black Oxide
Eklind® 54950 Hex Key, Hex Drive, Cushion Grip/T-Handle Handle, ANSI B18.3, Alloy Steel, Black Oxide
JASON 360H200 SYNCHRONOUS BELT, 1/2 " PITCH; 36" PITCH LENGTH;2" BELT WIDTH. 72 TEETH
SYNTHETIC RUBBER TIMING BELT. COMFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS360H200 >
