2012X1.1/16 1-1/16" -ID 2012-style Taper-lock Bushing-brw2012x1.
1-1/16" -ID 2012-STYLE TAPER-LOCK BUSHING-BRW2012X1.1/16 >
Recently Viewed
1-1/16" -ID 2012-STYLE TAPER-LOCK BUSHING-BRW2012X1.1/16 >
Gardner Bender OX-100B Anti-Oxidant Compound, 1 oz Container Squeeze Tube Container, Semi-Solid Form, Gray, Specific Gravity: 1.37
Ox-Gard Anti-Oxidant Compound contains prime grade zinc and is formulated with metallic zinc to create a compound that enhances electrical and thermal conductivity which is used on high power crimp connections and stud bolt mountings. When the connection is tightened, the grease is displaced, leaving a layer of zinc filling in the surface imperfections of the interface. This has a twofold effect; it improves electrical conductivity and it improves thermal conductivity. This reduces the connection temperature under high power conditions by a reduced voltage drop and by providing a heat conductivity path to the connection's substrate. Ox-Gard Anti-Oxidant Compound is manufactured with unique grease compounded from custom refined low Sulphur oil. The grease base ensures brush-ability over a wide temperature range, tenacious adherence to all surfaces, resistance to water wash out and the prevention of rust and corrosion. This makes the product easier and more reliable to use.
Browning 18-TOOTH P-BUSH #80 CHAIN SPROCKET BRW H-80-P-18
Browning® offers a variety of bushing type sprockets available in single and double strands. Offerings include 35 to 160 pitch range. Bushed type bore ranges are available from 1/2 to 5 in. Hardened teeth are available up to 30 teeth.
7/8"-ID 1008-STYLE TAPER-LOCK BUSHING - BRW1008X7/8 >
1/2" -ID SOLID SHAFT COLLAR
GEARWRENCH® 9617N Open End Regular Length Reversible Combination Wrench, 17 mm Wrench, 12 Points, 15 deg Offset, 8.74 in OAL, High Alloy Steel, Polished Chrome
The reversible ratcheting combination wrenches from GEARWRENCH® are a staple for every tool box. The flush-mounted reversing lever allows the user to switch motion left to right without needing to remove the wrench from the fastener increasing productivity. The 15 deg offset on the ratcheting box end allows for greater knuckle clearance and safer access to the fasteners. The ratcheting box end is designed to need as little as 5 deg to move fasteners versus 30 deg for standard wrenches and features off-corner loading for a better grip on the fastener and reduces fastener rounding. The wrenches are made from strong alloy steel with a bright, full polish chrome finish.
