1610X1.1/16 Taper Bore Bushing 1-1/16" Bore-brw1610x1.
TAPER BORE BUSHING 1-1/16" BORE-BRW1610X1.1/16 >
Recently Viewed
TAPER BORE BUSHING 1-1/16" BORE-BRW1610X1.1/16 >
The Klein 66321 Pin Punch is made from high-carbon steel for durability. It has a precision-ground shank. It is also heat-treated for added strength and hardness at the working end.
Browning® 1069517 Split Taper Bushing, 1-5/8 in Dia Bore, 1.8555 in Small End/1.9375 in Large End Dia Barrel, 3 in Dia Flange, 1-15/16 in OAL, Sintered Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
JASON 5R5V1320 WEDGE BANDED V-BELT, 5/8 " TOP WD X 132" OL X 17/32" THICK, X5 BANDS
OIL AND HEAT RESISTANT, STATIC DISSIPATING. A RAW EDGE, COGGED CONSTRUCTION FURTHER INCREASES THE EFFECTIVE POWER TRANSMISSION OF DEEP WEDGE V-BELTS.
- JAS5R5V1320>
5-GRV BANDED B-148 V-BELT-GAT5/B148 >
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
