VARIABLE SPEED BELTS

V-BELTS -PIXD162 >

CONFORMS TO RMA ENGINEERING STANDARD, TIME BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH, THE LETTER AND SOMETIMES NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH.
-JAS4430V790 >

POLYESTER TENSILE MATERIAL; RUBBER OUTER MATERIAL MULTI-RIB V-BELT
-JAS450J8 >

VARIABLE SPEED COGGED V-BELT FOR DRIVE APPLICATIONS WITH A SPEED CHANGE REQUIREMENT-
JAS1922V277>

CONSISTENT PERFORMANCE IN MULTIPLE V-BELT DRIVES-ENSURE ALL BELTS WILL MEASURE WITHIN ARPM MATCHING STANDARDS. BANDED CONSTRUCTION-FABRIC/NEOPRENE TOP BAND ENHANCES STABILITY AND PREVENT BELTS FROM TURNING OVER OR COMING OFF THE DRIVE. OIL & HEAT RESISTANT
-JAS2RB115 >

VARIABLE SPEED BELT MADE OF CHLOROPRENE MATERIAL. FOR USE ON VARIABLE SPEED SHEAVE DRIVE REQUIRING EXACT SPEED CONTROL AND MAXIMUM RANGE OF SPEED CHANGES.
-JAS2322V521 >

POLYESTER TENSILE MATERIAL; RUBBER OUTER MATERIAL MULTI-RIB V-BELT
12-RIB POLY-V V-BELTS -JAS690J12 >

POLYESTER TENSILE MATERIAL; RUBBER OUTER MAT; 8 BANDS
-JAS690J8 >

COGGED BELT TYPE, 1" BELT WIDTH, EPDM BELT MATERIAL, OIL-RESISTANT
PIX1626V293>

THE BELTS EXCEED USA RMA PUBLISHED RATINGS LEVELS. THEY ARE DESIGNED TO PERFORM AT THE IDENTICAL OR HIGHER LEVEL THAN ALL OTHER MAJOR USA MANUFACTURER'S BELTS OF THE SAME TYPE.
-PIX1922V321>

MULTI-SPEED BELT ADJUST TO THE PULLEY GROOVE WITH DIFFICULTY, PROVIDING A WIDE RANGE OF SPEEDS AND SPEED RATIOS

-PIX1922V338 >

HIGH PERFORMANCE EFFICIENCY: ENGINEERED FOR MAXIMUM EFFICIENCY, THIS PRODUCT DELIVERS EXCEPTIONAL PERFORMANCE WITHOUT COMPROMISING ON QUALITY. IT'S A VERSATILE REPLACEMENT SUITABLE FOR VARIOUS APPLICATIONS
- PIX1922V426>

VARIABLE SPEED BELTS FEATURE A RIGID TOP COVER THAT WITHSTANDS OIL AND HEAT. THEY ARE SUITABLE FOR HIGHER HORSEPOWER APPLICATIONS WITH WIDE SPEED RANGES OR HIGH HEAT EXPOSURES. THESE BELTS ARE OFTEN USED IN BAND SAW, MILLING MACHINES, AND CONVEYOR SYSTEMS THAT CAN SPEED UP AND SLOW DOWN
-PIX2830V363 >

VARIABLE SPEED BELTS FEATURE A RIGID TOP COVER THAT WITHSTANDS OIL AND HEAT. THEY ARE SUITABLE FOR HIGHER HORSEPOWER APPLICATIONS WITH WIDE SPEED RANGES OR HIGH HEAT EXPOSURES. THESE BELTS ARE OFTEN USED IN BAND SAW, MILLING MACHINES, AND CONVEYOR SYSTEMS THAT CAN SPEED UP AND SLOW DOWN.
PIX2322V441 >

VARIABLE SPEED BELTS FEATURE A RIGID TOP COVER THAT WITHSTANDS OIL AND HEAT. THEY ARE SUITABLE FOR HIGHER HORSEPOWER APPLICATIONS WITH WIDE SPEED RANGES OR HIGH HEAT EXPOSURES. THESE BELTS ARE OFTEN USED IN BAND SAW, MILLING MACHINES, AND CONVEYOR SYSTEMS THAT CAN SPEED UP AND SLOW DOWN.
-PIX2426V343 >

30 DEGREE ANGLE SERIES; VARIABLE SPEED STYLE, 57-1/2" PITCH LENGTH; 1-9/16" WIDTH, 58-1/2" OUTSIDE LENGTH, POLYESTER TENSILE MATERIAL
-PIX2530V575 >

30 DEGREE ANGLE SERIES; VARIABLE SPEED STYLE, 59-1/2" PITCH LENGTH; 1-9/16" WIDTH, 59-1/2" OUTSIDE LENGTH, POLYESTER TENSILE MATERIAL
-PIX2530V595 >

VARIABLE SPEED BELTS FEATURE A RIGID TOP COVER THAT WITHSTANDS OIL AND HEAT. THEY ARE SUITABLE FOR HIGHER HORSEPOWER APPLICATIONS WITH WIDE SPEED RANGES OR HIGH HEAT EXPOSURES. THESE BELTS ARE OFTEN USED IN BAND SAW, MILLING MACHINES, AND CONVEYOR SYSTEMS THAT CAN SPEED UP AND SLOW DOWN
- PIX3830V580>

THESE BELTS ARE USED PRIMARILY ON ALL NEW DRIVES BECAUSE OF SPACE SAVINGS ACHIEVED BY USING THESE BELTS. THEIR USE IS IN ALL INDUSTRIAL APPLICATIONS FROM LIGHT DUTY DRIVES AS THOSE FOR PUMPS TO HEAVILY LOADED STONE CRUSHER DRIVES. IN WEDGE BELT DRIVES, BANDED BELTS CAN BE REPLACED BY SINGLE BELTS WITHOUT CHANGING THE PULLY CONFIGURATION. OIL RESISTANT, ANTISTATIC .
-PIXSPB2500>

METRIC V-BELTS-PIXSPB2430>

VARIABLE SPEED BELT, 30 DEGREE ANGLE SERIES, 34-1/2" PITCH LENGTH; 1-5/8" WIDTH; 35.3" OUTSIDE LENGTH, KEVLAR TENSILE MATERIAL
-JAS2630V345 >