SPA-1082 JASON INDUSTRIAL PRODUCTS
METRIC V-BELT 1082-MM-JASSPA1082 >
Recently Viewed
METRIC V-BELT 1082-MM-JASSPA1082 >
Browning® 1045459 VP Series Type 2 Variable Pitch Sheave, 1-1/8 in Finished Bore, 4-3/4 in OD, 1 Groove, 3.3 to 4.1 in (3L)/3.6 to 4.6 in (A/4L)/3.8 to 4.8 in (B/5L) Dia Pitch, 3/4 to 1-1/8 in W Face
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.
RIDGID® 33055 Enclosed Feed Tubing Cutter, 1/4 to 2-3/8 in Nominal, Ergonomic Grip Handle
RIDGID® 33055 Enclosed Feed Tubing Cutter, 1/4 to 2-3/8 in Nominal, Ergonomic Grip Handle
7-R-B-78 JASON INDUSTRIAL PRODUCTS
7-GROOVE BANDED B-78 V-BELT - JAS7RB78>
5/8" X 3" X /H OVAL DIE SPRINGS-LANSEHO625300 >
The RBC® SJ series of Pitchlign® heavy duty needle roller bearings are supplied in standard envelopes in both sealed and unsealed configurations. There are eight possible seal configurations. The seals can include double or single seal with the seal lip turned inward or outward. The seal can be mounted in the radius end of the ring or the chamfered end of the ring for optimum mounting variations.
